EC Buying ZK-PP1K PWM Pulse Signal Generator, Frequency Generator PWM Pulse Number and Frequency Duty Cycle Adjustable LED Display with Shell Module,

EC Buying ZK-PP1K PWM Pulse Signal Generator, Frequency Generator PWM Pulse Number and Frequency Duty Cycle Adjustable LED Display with Shell Module,

♥Product introduction: This series of products are PWM and pulse signal generators. There are PWM mode and pulse mode. Only one mode can be used at a time, but the two modes can be switched at any time. ♥Features: 1. Two modes can be selected: PWM mode - frequency (continuous), duty cycle. The number of pulses is not adjustable, and the waveform is continuously sent; PULSE pulse mode - positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable. 2. With the start and stop button (ZK-PP1K can be connected to an external switch to control the output signal ON/OFF). 3. Wide voltage input 3.3V-30V, with anti-reverse connection protection. ♥Product Specifications: 1. Working voltage: 3.3V~30V, with anti-reverse polarity protection 2. Frequency range: 1Hz~150KHz, the accuracy is about 1% 3. Duty cycle range: 0-100%, 1% step 4. Number of pulses: 1-9999, or infinite (display '----' means infinite) 5. Delay output time: 0.000s-9999s, the minimum can be set to 1ms 6. Positive and negative pulse width length: 0.000s-9999s, the minimum can be set to 1ms 7. Signal carrying capacity: ZK-PP1K: less than 30mA ♥Operation explanation: 1. There is an output waveform when powered on; 2. Waveform amplitude = power supply voltage; 3. When the number of output pulses reaches the set value, the output will be automatically stopped, and 'OUT' will disappear; 4. Press the ON key to control the presence or absence of the waveform, the disappearance of OUT means that there is no output waveform, and the output is 0; 5. Power on and restart or ON key to turn on the output, and recalculate the number of pulses; ♥Application scenarios: 1. PWM signal generator, square wave rectangular wave signal generator. 2. It is used to generate square wave and rectangular wave signals to control DC motor or stepper motor driver; it is used for servo motor, stepper motor, electric gripper, replace PLC pulse, etc. 3.ZK-PP1K can be matched with drivers to realize dimming, speed regulation, control solenoid valves, etc., but cannot directly drive loads such as electric light motor solenoid valves, etc.
✭signal generator product introduction:

This series of products are PWM and pulse signal generators. There are PWM mode and pulse mode. Only one mode can be used at a time, but the two modes can be switched at any time.

✭Product Specifications:

1. Working voltage: 3.3V~30V, with anti-reverse polarity protection

2. Frequency range: 1Hz~150KHz, the accuracy is about 1%

3. Duty cycle range: 0-100%, 1% step

4. Number of pulses: 1-9999, or infinite (display '----' means infinite)

5. Delay output time: 0.000s-9999s, the minimum can be set to 1ms

6. Positive and negative pulse width length: 0.000s-9999s, the minimum can be set to 1ms

7. Signal carrying capacity: ZK-PP1K: less than 30mA

8. Output signal amplitude: the amplitude is equal to the supply voltage

9. Product size: ZK-PP1K: 79mm*43mm*30mm

10. Product weight:ZK-PP1K:40g

11. Packaging form: anti-static bag packaging

✭ZK-PP1K PWM pulse signal generator Operation explanation:

1. There is an output waveform when powered on;

2. Waveform amplitude = power supply voltage;

3. When the number of output pulses reaches the set value, the output will be automatically stopped, and 'OUT' will disappear;

4. Press the ON key to control the presence or absence of the waveform, the disappearance of OUT means that there is no output waveform, and the output is 0;

5. Power on and restart or ON key to turn on the output, and recalculate the number of pulses;

✭Application scenarios:

1. PWM signal generator, square wave rectangular wave signal generator.

2. It is used to generate square wave and rectangular wave signals to control DC motor or stepper motor driver; it is used for servo motor, stepper motor, electric gripper, replace PLC pulse, etc.

3. ZK-PP1K can be matched with drivers to realize dimming, speed regulation, control solenoid valves, etc.