Pokin Urethane Band Saw Tires Replaces for 10 Inch InchDelta bandsaw 28-195 0.095 Inch Inch Thick - 2pc Heavy Duty Tires

Pokin Urethane Band Saw Tires Replaces for 10 Inch InchDelta bandsaw 28-195 0.095 Inch Inch Thick - 2pc Heavy Duty Tires

Urethane Bandsaw Tires - Specifically for 10"inch Delta 28-195 Band Saw .Consistent .095" thickness across the entire width of the tire for precise blade tracking LONG LASTING：Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires.The value 2 pack provides excellent value and quality. INCREASED PRODUCTIVITY & EFFICIENCY : Urethane doesn't dry out when compared to plastic or rubber tires. This increases their efficiency and life expectancy.There's reduced down time with these durable & reliable band saw tires. NO ADHESIVE NEEDED :No adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary. NOTICE ：It is recommended to immerse the new tire in hot water for a few minutes before use. This will make things easier. Urethane tires specifically made for the 10" Delta 28-195 . Heavy Duty Urethane .095" Thick

Long Life: These Band Saw Tires are superior to factory tires, or replacement rubber or plastic tires. The value 2 pack provides excellent value and quality.

Won't Dry Out: Urethane doesn't dry out when compared to plastic or rubber tires. This increases their efficiency and life expectancy.

No Adhesive Needed: Easy to install & remove with no need for adhesive. The tires stretch to fit the wheel tightly.

First, After disassembling old "tires", clean up the gummy debris left on the wheels.

First Step ：Used a clamp to hold the tire on the wheel in one spot, and then used a screwdriver to pry the rest of the tire on. This made installation relatively easy

Second : Uniform stretch,After mounting, removed the clamp and pushed the shaft of the screwdriver completely under the tire, so it was between the tire and rim. Then ran the screwdriver around the wheel several times to make sure the tire was uniformly stretched around the wheel.

Seating the tire: Next, made sure the tires were properly seated in the groove on the wheels, rolled the wheel on a concrete floor, pushing down pretty hard with your hands, so the concrete would forced the tire into the groove.

After mounting, reinstalled the wheels and readjusted everything, finish!

Notice ：Urethane band saw tires no adhesive needed, but need to be stretched on. If your new band saw tire is too tight to fit onto the wheel, submerged the new tire under hot water for a few minutes, this will make things easier.

SALES- SERVICE ：100% worry-free return.For any reason you are not completely satisfied with our products, please feel free to contact us. We will provide you with a satisfactory shopping experience.