2-Pack Universal CV Joint Boot Repair Kit – Silicone Axle Boots for 19mm-24mm Shafts, Waterproof & Dustproof with 4 Stainless Steel Clamps & 6 Cable

2-Pack Universal CV Joint Boot Repair Kit – Silicone Axle Boots for 19mm-24mm Shafts, Waterproof & Dustproof with 4 Stainless Steel Clamps & 6 Cable

You Will Get: 2 CV joint boot, 4 stainless steel clamps and 6 cable ties. Suitable for most vehicles. Installation is simple, you simply remove the old or worn CV boot, and then use the mounting cone to put the new CV axle boot into the axle Good Quality: Made of quality silicone material, with excellent wear resistance, high temperature resistance. The softness and elasticity of the silicone allows the CV boot to fit tightly and not loosen or fall off due to the vibration of the vehicle Specifications: Axle boot is 4.72 inch in length and small port inside diameter is 0.78 inch, and contains three different calibers: 2.55 inch/65 mm, 3.14 inch/80 mm and 3.54 inch/90 mm. Please check the size data you need before purchase Excellent Protection: The CV axle boot acts like a sturdy shield, providing full protection. It can effectively prevent the intrusion of dust, sand, water and other impurities, and at the same time, avoid the overflow of grease from the ball cage Maintenance: In the daily maintenance of the vehicle, the CV axle boot should be regularly checked for signs of damage, cracks, aging, deformation, and whether the fixed devices at both ends are loose. If any damage is found, it should be replaced in time

Product Attributes

Colors: Black

Sizes: 4.72×3.54×3.54 inch

Weight: 8.34 oz

Material: Silicone

Packaging: 2* CV Boots+2* Large Clamps+2* Small Clamps+6* Nylon Cable Ties

Product Installation

1. Start by applying a suitable amount of grease evenly onto the axle to reduce friction, lower wear, support heat distribution, and limit rust formation

2. Next, use a cone-shaped tool to carefully position the new CV boot onto the axle, keeping full coverage. Align the boot correctly—the larger end should face outward, while the smaller end faces inward

3. Finally, secure the boot tightly to the axle using the provided clamps or ties,keeping they are fastened properly without excessive tightening, which might loosen or damage the boot over time