DSY SS3 Float Switch with Adjustable Nut Bracket,Condensate Overflow Switch for HVAC Systems(1 Pack)

DSY SS3 Float Switch with Adjustable Nut Bracket,Condensate Overflow Switch for HVAC Systems(1 Pack)

[Principle of Use]:The switch can be connected to either the VCC or thermost at wires,it is NC type(normally closed)switch:When there is no water overflowing,the floater stays on the bottom of the switch,the switch is close loop,and output ON signal;When there is water overflowing,the floater is raised by buoyancy and trigger the switch to open loop,and output OFF signal to shut-off the device. [description of products]:LLS-SS3-N water level switch is used for HVAC system to detect the condensate overflow, it detects clogged air conditioning condensate drains and shuts off the system to prevent the overflowing water damage to floors, walls and ceilings. [Easy installation]:The LLS-SS3-N includes a bracket and a switch. It can be installed on the wall of the drainage pan, fix the bracket at the bottom of the side of the pan, and tighten the screws to the correct position. Ensure that the switch assembly is perpendicular to the ground and the bracket, and ensure that the top of the float ball is lower than the edge of the pan. The sensitivity can be adjusted by pulling the switch assembly out from the bracket downward. [product feature]:This easy to install with stainless steel self-hold bracket.Adjustable nut, suitable for water trays of different thicknesses, can be used on water trays up to 4mm thick at most,and easy for removing and cleaning The LLS-SS3-N water level switch is used in the HVAC system. It can detect the overflow of condensate water and is equipped with adjustable nuts, which can adapt to water pans of different thicknesses.