uxcell 10000uF 16V 16x30mm Electrolytic Capacitor, Radial Leads Aluminum Capacitors for TV, LCD Monitor, VCD, 5Pcs

uxcell 10000uF 16V 16x30mm Electrolytic Capacitor, Radial Leads Aluminum Capacitors for TV, LCD Monitor, VCD, 5Pcs

Aluminum electrolytic capacitor, 10000uF, 16V, 5 pieces in package. High working temperature range from -40℃ to +105℃; Capacitance Tolerance: ±20% Body Size: 16mm Diameter x 30mm Length; Fit with 7.5mm hole space. Widely used in TV, VCD, speaker, digital camera, dishwasher, washing machine, refrigerator, etc. Please take all its characteristics (required life, temperature, ripple current and physical size) into consideration before your purchasing Specification:
Capacitance: 10000uF
Rated Voltage: 16V
Capacitance Tolerance: +/-20% (at 120Hz, 20℃)
Lead Type: Radial
Category Temperature Range: -40℃ to +105℃ (6.3~100V)
Life Span: 2000-3000h
Body Size: 16x30mm
Lead Length: 20mm,25mm
Lead Space: 7.5mm
Lead Diameter: 0.6mm
Package Content: 5 x Electrolytic Capacitors

About Item:
-Aluminum electrolytic capacitors are designed for use in all types of electronic equipment including power and energy, industrial, telecommunications and consumer electronics applications.
-These capacitors offer very long life in applications, with rated temperatures up to 105℃ for general-purpose applications.
-Aluminum electrolytic capacitors are used when a large capacitance is required and leakage current is not an important factor.
-For use in power supplies and computer motherboards.

Pay attention to the following cautions:
DO NOT move the capacitor after soldering to PC board.
DO NOT pick up the PC board by holding the soldered capacitor.
DO NOT insert the capacitor on the PC board with a hole space different from the specified lead space.
Take the position of the safety vent into consideration when designing the PC board layout.
Excessive soldering time, temperature excessive or mounting force can negatively affect the capacitor's characteristics.
The long lead is the positive end, and the shorter one is the negative end.

How to select the proper capacitor for your design?
Step 1: Determine the capacitance required by the design.
Step 2: Define the expected ambient operating temperature.
Step 3: Define the DC operating voltage to be applied to the capacitor.
Step 4: Bound the space available for the capacitor (if available space is a concern).