SKLK-SEL OBD2 OBD Power Cable for Dash Camera OBDII to USB C Adapter Hardwire Charger Cable 24 Hours Surveillance/Acc Mode with Low Voltage Protection

SKLK-SEL OBD2 OBD Power Cable for Dash Camera OBDII to USB C Adapter Hardwire Charger Cable 24 Hours Surveillance/Acc Mode with Low Voltage Protection

【OBD2 Power Cable Specification】ACC mode Input:12.8V-36V/Output:5V 3A; Surveillance mode Input:11.6V-36V/Output:5V/3A 【Mode 0】ACC mode, when your car Acc is off, the OBD power cable will also power off after 20 minutes;【Mode -】 Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V[12V car]/23.4V[24V car](low voltage),it will power off after 5 minutes 【Wide Compatibility】The OBD power cable for dash camera fits various vehicles like Jeep Cherokee, Chevy, Toyota, Truck, etc. with OBD or OBD2 ports. The OBD power cable also suitable for multiple Type-C usb port devices such as dash cams, GPS navigators and radar detectors 【Upgrade to New Features】Vibration detection, with a built-in high-sensitivity vibration sensor used to control the operation of the OBD power cable. Once the vehicle vibrates, the OBD adapter will immediately supply power to the driving recorder, such as when the vehicle starts, moves, large vehicles pass by from the side, the vehicle is hit, the doors are opened or closed, etc., avoiding the problem of inaccurate monitoring voltage causing the car battery to run off in the old model 【Note】1.Try to avoid places where the vehicle is parked where there is a huge vibration (which may falsely trigger the obd 2 type c power cable); 2.The USB Type-C connector of this obd ii power cable uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins，there may be situations where the time-lapse recording function cannot be used; 3. obd suitable for all Type-C port electronic devices generally. (May not work with some phone charging protocol) 【Low Voltage Protection OBD2 Power Cable】OBD2 power adapter for dash cam is equipped with an intelligent program control chip, which automatically detects battery voltage and provides low voltage protection. When the battery voltage drops below 11.6V, the power output is automatically cut off to ensure normal vehicle startup. Don't worry about this obd power adapter for dash cam usb c damaging your car battery Packaging Content：1 X OBDII dashcam hardwire kit (USB Type-C), 1 X Opening Tool Bar, 1 X Micro USB Connector, 1 X Mini USB Connector,4 X Wire Fixing Device (Note: When switching to the MINI/MICRO interface, the time-lapse recording function of the dash cam is not supported.) Note: it is NOT compatible with some vehicles,If you have 2020 Ram rebel,Ford F150 2021, Ford F150 Lariat 2011, Ford F350, Ford Edge 2011, Ford Explorer 2013, Ford Expedition 2013, Ford Ranger 2021 trucks/cars,this will not work for you,and Please let us know if there are any other incompatible vehicles. Thank you OBD2 Power Cable Specification:
ACC mode Input:12.8V-36V / Output:5V 3A;
Surveillance mode Input:11.6V-36V / Output:5V/3A
Extension cable:3.5meter (11.5ft) length

Mode 0:
ACC mode, when your car Acc is off, the OBD power cable will also power off after 20 minutes;

Mode -:
Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V[12V car]/23.4V[24V car](low voltage),it will power off after 5 minutes

Wide Compatibility:
The OBD power cable for dash camera fits various vehicles like Jeep Cherokee, Chevy, Toyota, Truck, etc. with OBD or OBD2 ports. The OBD power cable also suitable for multiple Type-C usb port devices such as dash cams, GPS navigators and radar detectors.

Precautionary Note for OBD Power Adapter:
1.Try to avoid places where the vehicle is parked where there is a huge vibration (which may falsely trigger the obd 2 type c power cable)
2.The USB Type-C connector of this obd ii power cable uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins，there may be situations where the time-lapse recording function cannot be used
3.Dash cam power adapter obd suitable for all Type-C port electronic devices generally. (May not work with some phone charging protocol)
Packaging Content：
1 X OBDII dashcam hardwire kit (USB Type-C)
1 X Opening Tool Bar
1 X Micro USB Connector
1 X Mini USB Connector
4 X Wire Fixing Device
(Note: When switching to the MINI/MICRO interface, the time-lapse recording function of the dash cam is not supported.)

Note:
It is NOT compatible with some vehicles,If you have 2020 Ram rebel,Ford F150 2021, Ford F150 Lariat 2011, Ford F350, Ford Edge 2011, Ford Explorer 2013, Ford Expedition 2013, Ford Ranger 2021 trucks/cars,this will not work for you,and Please let us know if there are any other incompatible vehicles. Thank you