iUoyoMon 5 Inch Touch Screen IPS DSI Display Compatible with Raspberry Pi 5/4/3/B+/A+, 800x480 Pixel IPS Capacitive Screen, Driver-Free MIPI DSI Port

iUoyoMon 5 Inch Touch Screen IPS DSI Display Compatible with Raspberry Pi 5/4/3/B+/A+, 800x480 Pixel IPS Capacitive Screen, Driver-Free MIPI DSI Port

5 inch raspberry pi screen with 800×480 pixels, IPS capacitive touchscreen supports PWM backlight brightness adjustment. Designed for Raspberry Pi to connect directly to the MIPI DSI interface on the motherboard. Compatible with Raspberry Pi 5/4b/3b+/3b/3a+/2b/1b+/1a+ (not for other devices). IPS capacitive touch screen Raspberry Pi OS supports multi-touch, while Ubuntu, Kali, Win10 IoT and other systems only support single touch. For systems suitable for new systems or with the same configuration, no configuration is required, plug and play. If you have any questions about DSI touch screen, please feel free to contact us. We promise to provide comprehensive support within 24 hours.

Key Points to Note

This is a kit only. A Raspberry Pi board is not included.

This display connects via the DSI port, not HDMI.​ It is specifically designed for and only compatible with Raspberry Pi.

Product Overview

This 5-inch IPS display features a responsive 5-point capacitive touchscreen. Its direct DSI connection (to the CAM/DISP port on Pi 5 or the DISPLAY port on earlier models) offers a simple setup—just plug in the cable.

Compatibility

Designed exclusively for the following Raspberry Pi  5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+

Note:​ This display does not have an HDMI interface and is not compatible with PCs, laptops, smartphones, or other devices not listed.

Display Specifications

• Size:​ 5 Inches
• Resolution:​ 800 (H) × 480 (V) Pixels
• Refresh Rate:​ 60Hz
• Panel Type:​ IPS (Wide Viewing Angle)
• Touch Control:​ 5-Point Projected Capacitive
• Interface:​ MIPI DSI

What’s in the Box

• 1 × 5-Inch Touchscreen Display
• 1 × 5cm Length FPC Ribbon Cable
• 1 × 10cm Length FPC Ribbon Cable
• 1 × 16cm Length FPC Ribbon Cable (for RPi 5)
• 1 × Crosshead Screwdriver
• 4 × M2.5x4+4mm Standoffs
• 4 × M2.5x4mm Screws
• 2 × M2.5x12mm Screws
• 2 × Display Stands

We provide free technical support to ensure you get everything working smoothly.