Apex Heavy Duty Self-Dumping Hopper, 1.5 Cubic Yard Capacity, 6000 lb Load Rating, Reinforced Steel Tilt Skip with Watertight MIG-Welded Body for High

Apex Heavy Duty Self-Dumping Hopper, 1.5 Cubic Yard Capacity, 6000 lb Load Rating, Reinforced Steel Tilt Skip with Watertight MIG-Welded Body for High

HIGHER VOLUME 1.5 YARD CAPACITY – 1.5 cubic yard (approx. 1.15 m³) size moves more scrap, offcuts and waste per trip than 1 yard models, helping reduce forklift cycles and operator time on larger production lines and job sites. SINGLE-MOTION E-Z RELEASE SAFETY LATCH – One-motion, self-locking latch keeps the operator behind the mast and out of the pinch zone, promoting safer operation and helping prevent accidental or partial dumps. HEAVY 7-GAUGE STEEL AND THICK RAILS – Built with 7-gauge steel body, 1/4 inch formed base rails, 3/8 inch cross braces and a 1/2 inch flame-cut handle to handle heavier loads and more aggressive dump cycles without twisting or cracking. SOLID 5/8 INCH ROCKER WITH S-STOPS – Single-piece 5/8 inch solid steel rocker and 1 inch S-stops provide a strong, predictable pivot, reducing the jerky, slam- style behavior operators hate in lower-end self-dumping containers. 100% MIG-WELDED WATERTIGHT INTERIOR – Fully MIG-welded seams and a reinforced 3/16 inch structural angle iron top edge produce a watertight shell that contains liquids and fines, suitable for wet scrap and coolant-soaked material within rating. REINFORCED EDGE FOR STRUCTURAL STIFFNESS – Structural angle rim keeps the mouth of the hopper square and strong, cutting down on edge damage and sharp lip issues that show up early on bent-edge designs. CLEAR CAPACITY AND FORKLIFT MATCHUP – Capacity and 6000 lb rating are designed to be matched with appropriate forklift capacity and fork specs, giving safety and maintenance teams the information needed to approve attachments under. SPEC CHECK BEFORE ORDERING – Verify fork pocket size and rated capacity to match your forklift and the loads you plan to handle, so the attachment fits correctly and performs as expected. The 1.5 cubic yard heavy duty self-dumping hopper is aimed at operations where 1 yard containers fill too quickly and crane or cart shuttling is not the answer. It moves more material per forklift trip while preserving Apex’s focus on safety, durability and leak resistance. With 1.5 cubic yards of capacity and a 6000 lb rating, it suits lines and cells that generate significant scrap volume. Construction centers on 7-gauge steel, 1/4 inch base rails, 3/8 inch cross braces and a 1/2 inch flame-cut handle. The single-piece 5/8 inch rocker with 1 inch S-stops is designed to handle repeat cycles without the slop and shock that plague pin-hinge designs, giving operators more controlled dumping and fewer complaints about slam-downs. The hopper is 100% MIG-welded for a watertight interior and finished with a 3/16 inch structural angle iron top edge that resists rim deformation. The E-Z Release single-motion self-locking latch helps keep operators behind the mast and avoids dangerous reaching. Capacity and rating details support better forklift matching and alignment with . Built in the USA from domestic steel by American worker.