resplabs CPAP Headgear Compatible with ResMed AirFit and AirTouch F20 Full Face Mask - Replacement Head Strap - Adjustable, Secure, Comfortable Fit (

resplabs CPAP Headgear Compatible with ResMed AirFit and AirTouch F20 Full Face Mask - Replacement Head Strap - Adjustable, Secure, Comfortable Fit (

FITS RESMED AIRFIT F20 AND AIRTOUCH F20: Direct replacement headgear for the F20 full face mask. Same clip-in connection as the original. If your current headgear is stretched, fraying, or you have to overtighten to stop leaks, this is what you need. Available in Small, Standard, and Large to match your cushion size. HALF THE PRICE OF RESMED OEM: ResMed charges $30-40 for replacement headgear through your DME. Same fit, same function, fraction of the cost. FSA and HSA eligible. Stock up and swap every 6 months to keep your seal tight and your skin comfortable. KNOW WHEN TO REPLACE: Headgear loses elasticity over time. If you are cranking your straps tighter than when you first got the mask, the headgear is worn out. Overtightening causes red marks, skin irritation, and actually makes leaks worse. Fresh headgear solves the problem at the source. SOFT MATERIAL, LESS IRRITATION: The fabric sits against your skin for 6-8 hours every night. This headgear uses a soft, breathable material that reduces the redness and strap marks that come with stiff or degraded straps. For extra comfort, add our fleece strap covers or the cpaphat full head liner. INSTALL IN UNDER A MINUTE: Unclip your old headgear from the mask frame, clip the new one on. No tools needed. Works with the same magnetic clips as the original ResMed F20. If you are not sure which size you need, check the size printed on your current F20 cushion. resplabs Replacement Headgear for ResMed AirFit F20 and AirTouch F20 Your CPAP headgear is the part of your mask that wears out fastest. After 6 months of nightly use, the elastic stretches, the fabric thins, and you start tightening the straps more and more to maintain a seal. That overtightening is what causes the red marks on your face, not the mask itself. This replacement headgear restores the original fit and tension your F20 mask was designed for. COMPATIBLE MASKS: - ResMed AirFit F20 (all sizes) - ResMed AirTouch F20 (all sizes) - NOT compatible with F20 Auto (different frame) or any other mask model SIZING: This listing is for the Small headgear. Your headgear size should match your cushion size. Check the size printed on your current F20 cushion or the original headgear. - Small: for petite and narrow faces - Standard: fits most users (most common) - Large: for wider or larger faces WHEN TO REPLACE: ResMed recommends replacing headgear every 6 months. Signs it is time: - You have tightened the straps beyond the original setting - The elastic feels soft or stretched when pulled - Strap marks are getting worse despite adjusting - Visible fraying or fabric thinning INSTALLATION: 1. Unclip the old headgear from both sides of the mask frame 2. Clip the new headgear onto the frame (same magnetic clip system) 3. Adjust the straps to a snug but comfortable fit 4. Done. No tools, no modifications. PAIR WITH: - resplabs Strap Covers (4-pack) to prevent strap marks on cheeks and forehead - resplabs cpaphat Headgear Liner for full head coverage under your headgear - resplabs F20 Mask Liners for cushion comfort and leak reduction FSA/HSA ELIGIBLE: CPAP headgear is a qualifying medical expense under most FSA and HSA plans.