ElecGear Desoldering Heating Plate for Joystick – Model UniA, Desolder Control Stick off Controller PCB with Soldering Iron, Repair Tool for Analog

ElecGear Desoldering Heating Plate for Joystick – Model UniA, Desolder Control Stick off Controller PCB with Soldering Iron, Repair Tool for Analog

[UniA Joystick Heating Plate] – Desolder the whole thumbsticks module off controller PCB with a normal soldering iron. With as many as 14 prongs, removing the problem stick is the most difficult task. An CNCed copper plate melts all the solder joints simultaneously. It makes it possible to remove the entire joystick at one time. There’re 3 different models for sticks in different dimensions: UniA, UniB and X360 [Choose the Correct Model] – UniA is for the normal joysticks made by ALPS, FU and other 3rd party widely used in most wired and wireless controllers: PS5, PS4, Xbox One and Elite and Series S|X, Switch Pro and most others. While UniB is slightly larger than UniA, it was found in some PDP, Power-A, Hori and BDA controllers. X360 is way larger which was found in Xbox 360 and some Logitech controllers. 🔺Please study the images and teardown your controller, measure the stick before ordering [Some Helping Tools included] – Multi gauge wires included that performs better than typical solder wick. Tin the wire, cut it to form a sharp tip, puncture the tip into the small hole to suck the solder in the small holes. Also included is the simple PCB clamps which helps to support the PCB on the workbench. 🔺Be noticed: Do not position the clamps close to hot joystick, or it will melt [What’s in Package] – 1x Heating Plate, 1x Teflon Pad, 1x Solder Remover Wire, 4x PCB clamps. (🔺Notes: Your soldering station should be more than 60Watt and with a big tip. The soldering iron and other soldering materials are required but NOT included!) The repair tools kit was designed for desoldering the joystick module off PCB with a normal soldering iron. The CNCed heating plate melts all the 14 solder joints simultaneously. Some helping tools included

Important Notes
1. There’re 3 different models for different joysticks. Please dismantle your controller and measure the joystick to choose the correct model
2. Your soldering iron should be more than 60W, choose a bigger iron tip and set the temperature high
3. Make sure the entire joystick unit should be replaced. In many cases, replacing the potentiometer alone can solve most joystick problems. Please go to the potentiometers at product ID: B09KVG19C1
4. Also take a look at the replacement analog joystick in UniA dimension modeled from EL1 to EL7 at ID: B09KVG7DGY

Compatible Example Lists
UniA Examples:
PS5 and DSE, PS4, PS3 (3Pin Version); Xbox One and Elite 1/2, Series S|X
Steam Deck, Switch Pro
Most 3rd party PC and console controllers:
Google Stadia, Nacon, RAZER Wolverine V2, 8-Bitdo SNES, Scuf Impact, ASTRO C40 TR, Victrix Pro BFG
and more

UniB Examples:
PDP Rematch 049-023
Some IINE, BDA, Hori
And more

X360 Examples:
Xbox 360 wired and wireless
Logitech F710
Hori Mini wired
And more

What’s in Package:
1x Heating Plate
1x Teflon Pad
1x Solder Remover Wire
4x PCB clamps
🔺Noted: Your soldering station should be more than 60Watt and with a big tip. The soldering iron and other soldering materials are required but NOT included!