ACEIRMC 6 Pairs Solar Connector Y Branch Parallel Adapter Cable Wire Plug 2 to 1 Male Female Connectors (6*M/FF, 6*F/MM) for Solar Panel (Black+Red)

ACEIRMC 6 Pairs Solar Connector Y Branch Parallel Adapter Cable Wire Plug 2 to 1 Male Female Connectors (6*M/FF, 6*F/MM) for Solar Panel (Black+Red)

Y branch parallel connector 1 male to 2 female(M/FF) and 1 female to 2 male(F/MM), which can connect 2 solar panels in parallel, compatible with PV cables with different insulation diameters 14-10AWG (1.5mm² - 6mm²). Solar Connector Y Branch Parallel Adapter can connect and disconnect the solar wire connectors and solar cables easily, plug and play, strong connection and not easy to fall off. The solar panel adapter uses PPO material, which are resistant to oxidation, UV and temperature(-40°F~+221°F). The male connector is rain and dust-proof to IP67 with a high quality sealing ring. Great for outdoor and indoor use For protection against electric shock, PV connectors must be isolated from the power supply while being assembled or disassembled. Unplugging under load: PV plug connections muct not be unplugged while under load. They can be placed in a no load state by switching off the DC/AC converter or breaking the AC circuit interrupter. Plugging and unplugging while under voltage is permitted.

Specification :

Product Name: Y branch connector

Cable length: 30cm / 12inch

Gauge:12AWG (4mm²)

Insulation Material: PPO

Rated Current: 20A

Rated Voltage: DC1000V

Contact Resistance: ≤5mΩ

Insulation Resistance: >500mΩ

Waterproof: IP67

Flame Class: UL94-V0

Safety Degree: II

Operating Temperature range: -40℃ ~ +90℃

Suitable for Cord Section: 1.5mm² -- 6mm²

Means AWG14, AWG13,AWG12, AWG11,AWG10

Advantage:

1. low power loss

2. solar connector for solar power system

3. all the connection made by double fixed connection

4. withthe capacity of anti-aging and resistance to ultraviolet radiation on the outcover

5. withconvenient installation, strong commonality

6. to meet the using requirement under bad outdoor condition

Package Includes:

6 * F/MM connector (Black)

6 * M/FF connector (Red)

Assembly Instructions

1. For protection against electric shock, PV connectors must be isolated from the power supply while being assembled or disassembled.

2. The end product must provide protection from electric shock.

3. Unplugging under load: PV plug connections muct not be unplugged while under load. They can be placed in a no load state by switching off the DC/AC converter or breaking the AC circuit interrupter. Plugging and unplugging while under voltage is permitted.

4. Disconnected connectors should be protected from dirt and water with sealing caps.