RC Models Aluminum Alloy Propeller Spinner 76-127mm(3.0-5.0inch) for 2 Blades Propeller Gasoline Engine Aeromodelling RC Parts (5.0''(127mm))

RC Models Aluminum Alloy Propeller Spinner 76-127mm(3.0-5.0inch) for 2 Blades Propeller Gasoline Engine Aeromodelling RC Parts (5.0''(127mm))

Specification: 3.0inch (76mm) for 26-30cc gasoline fixed wing airplane models; 3.25inch (82mm) for 40-45cc gasoline fixed wing airplane models; 3.50inch (89mm) for 50cc gasoline fixed wing airplane models; 3.75inch (95mm) for 60-80cc gasoline fixed wing airplane models; 4.0inch (102mm) for 80cc gasoline fixed wing airplane models; 4.5inch (114mm) for 100cc gasoline fixed wing airplane models; 5.0inch (127mm) for 170cc gasoline fixed wing airplane models; Product Features: 1.Aluminum alloy, metal material 2. High brightness polishing 3. Fluid design, low wind resistance There are two ways to install the hood. 1. The conical nut is fixed to the main shaft of the engine, and the conical nut is 10MM. 2. A 5MM screw in the propeller hood is fixed directly on the central hole of the engine spindle. Note: At present, all fairs can only be fitted with the E propeller. Because of the different shapes of the blades, the length and size of the fairs can only be roughly consulted. Check your engine shaft diameter carefully. Strictly, take out the actual blades and fairs, and install them manually.