Solid Zero Clearance Table Saw Inserts Compatible with DeWalt 8-1/4" DWE7485, DCS7485B & DCS7485T1 - Blank MDF Throat Plates for Custom Blade Slots &

Solid Zero Clearance Table Saw Inserts Compatible with DeWalt 8-1/4" DWE7485, DCS7485B & DCS7485T1 - Blank MDF Throat Plates for Custom Blade Slots &

✅ COMPATIBILITY CHECK: Designed exclusively for DeWalt 8-1/4 inch Jobsite Table Saws. Fits models DWE7485, DWE7485WS, DCS7485B, and DCS7485T1. Dimensions: 13" L x 3-3/4" W. ⚠️ NOTE: Does NOT fit 10" saws (DWE7491/DW745). 🛠️ CUSTOMIZABLE BLANK DESIGN: These inserts come solid (uncut), allowing you to raise your own saw blade through the insert. This creates a perfectly matched "Zero Clearance" slot for your specific blade kerf (thin or full), ensuring maximum support and precision. 🛠️ CUSTOMIZABLE BLANK DESIGN: These inserts come solid (uncut), allowing you to raise your own saw blade through the insert. This creates a perfectly matched "Zero Clearance" slot for your specific blade kerf (thin or full), ensuring maximum support. 🪚 ELIMINATES TEAR-OUT: By creating a custom slot that exactly matches your blade, these MDF inserts support wood fibers right up to the cut edge. This drastically reduces bottom-side tear-out and chipping, delivering furniture-grade results on plywood and laminates. 🛡️ DURABLE MDF & COATING: Constructed from high-density MDF that is rigid and flat. The low-friction yellow coating allows wood to slide smoothly and provides high visibility for safer operation. MDF is safer than plastic or metal for cutting your own slots as it won't damage carbide blade tips.

Create the Perfect Zero-Clearance Slot for Your Specific Blade!

Standard throat plates leave dangerous gaps around the blade. Pre-slotted inserts are convenient, but they don't always match the exact thickness of your blade (Kerf). Our Solid Blank Inserts are the professional's choice for ultimate precision.

Why Choose a Solid Blank Insert?
These inserts arrive without a slot. You install the blank insert and slowly raise your spinning blade through it. The result is a slot that matches your blade exactly. This prevents small off-cuts from jamming the throat and stops wood tear-out.

✅ COMPATIBILITY:
Fits DeWalt 8-1/4" Compact Saws ONLY:
* DWE7485
* DCS7485B
* DCS7485T1

⚠️ CRITICAL INSTALLATION NOTE:
This insert is approximately 3/8" (9.5mm) thick. It is designed to sit slightly lower than the table surface and must be leveled UP using the 4 adjustment screws (included) until it is perfectly flush.

Specifications:
* Type: Solid/Blank (No Riving Knife Slot Pre-Cut)
* Material: MDF with Yellow Coating
* Size: 13" x 3-3/4"
* Feature: Finger hole for easy removal

⚠️ IMPORTANT INSTALLATION NOTE:
This insert is approx. 3/8" thick. To ensure it sits flush with your table saw surface, you must use adjustment screws in the 4 corner holes. (Screws are NOT included in this package - please use your own hardware).