Industrial 2 PoE Ports Gigabit Fiber Media Converter, Boost Voltage Input DC9-57V to 48V Max PoE Output 60W, 1 SFP and 2 RJ45 IEEE802.3af/at 30W Fiber

Industrial 2 PoE Ports Gigabit Fiber Media Converter, Boost Voltage Input DC9-57V to 48V Max PoE Output 60W, 1 SFP and 2 RJ45 IEEE802.3af/at 30W Fiber

【𝐁𝐨𝐨𝐬𝐭 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝟗-𝟓7𝐕 𝐭𝐨 𝟒𝟖𝐕】:Supports 9-57V wide voltage DC input for power redundancy, power can up to 60W max, the 2 ports PoE switch can be used for RV Truck/Solar Power/VoIP ect. 【𝐈𝐄𝐄𝐄𝟖𝟎𝟐.𝟑𝐚𝐟/𝐚𝐭 𝐏𝐨𝐄 𝐒𝐭𝐚𝐧𝐝𝐚𝐫𝐝】: 𝟗-𝟓𝟖𝐕 𝐭𝐨 𝐏𝐨𝐄 𝟒𝟖𝐕 support 𝐈𝐄𝐄𝐄𝟖𝟎𝟐.𝟑𝐚𝐟 𝐏𝐨𝐄 (𝟏𝟓.𝟒𝐖) and 𝐈𝐄𝐄𝐄𝟖𝟎𝟐.𝟑𝐚𝐭 𝐏𝐨𝐄+(𝟑𝟎𝐖), 30W per port max power can reach 60W PoE output, can meet the power supply requirements of most devices. 【𝐀𝐮𝐭𝐨 𝐃𝐞𝐭𝐞𝐜𝐭𝐢𝐨𝐧 𝟏𝟎𝟎/𝟏𝟎𝟎𝟎𝐁𝐚𝐬𝐞-𝐅𝐗】: Equipped with 2 10/100/1000Base-T RJ45 ports with 100/1000M Auto Adaptive SFP Slot.You can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. 【𝐑𝐞𝐝𝐮𝐧𝐝𝐚𝐧𝐭 𝐏𝐨𝐰𝐞𝐫 𝐈𝐧𝐩𝐮𝐭】: Supports 8-pin simultaneous power supply (1/2/4/5+, 3/6/7/8-) and POE 𝐌𝐨𝐝𝐞 𝐀/𝐁 output, 2 channel 𝐫𝐞𝐝𝐮𝐧𝐝𝐚𝐧𝐭 𝐩𝐨𝐰𝐞𝐫 𝐢𝐧𝐩𝐮𝐭. Improve the stability and performance of the entire system. 【𝐈𝐏𝟒𝟎 𝐈𝐧𝐝𝐮𝐬𝐭𝐫𝐢𝐚𝐥 𝐆𝐫𝐚𝐝𝐞 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】: 6000V surge protection capability, being able to operate under the temperature range from - 40°F to 167°F. Small size 𝟑.𝟕𝟒*𝟐.𝟕𝟔*𝟏.𝟒𝟐𝐢𝐧(90*70*36mm), suitable for monitoring confined spaces.

The LNK-IMC1200G-SFP Mini 2G+1SFP Industrial 30W Media Converter is a device that converts optical signals into electrical signals, and converts electrical signals into optical signals for transmission and reception.

During data transmission, an optical transceiver receives the input optical signal and converts it into an electrical signal, which is transmitted to the target point on the transmission line. At the target location, the electrical signal is transmitted through the line, and is again received by an optical transceiver, and is converted into an output optical signal, which is transmitted to the target device. In this process, an optical transceiver must be able to adapt to high-speed, stable and reliable transmission requirements.

The transceiver provides one 100Base-FX or 1000Base-X sfp optical port，Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed.And two adaptive rj45 electrical ports, supporting full duplex/half duplex and MDI/MDIX adaptive. At the same time, the product adopts industrial design and devices, and the working temperature is between -40℃ and 75℃, which is suitable for the occasions where the environment is harsh and the transmission reliability is required.It has a wide range of applications in high-speed communications, networks and data centers, providing faster, stable and reliable data transmission services for people's lives.