15 psi Water Pressure Reducer Regulator for Drip Tape, 3/4 inch Hose Thread, 125 psi Max Inlet Pressure, Lead-free Brass, Low Flow Rate, Qty: 2

15 psi Water Pressure Reducer Regulator for Drip Tape, 3/4 inch Hose Thread, 125 psi Max Inlet Pressure, Lead-free Brass, Low Flow Rate, Qty: 2

Qty: 2. Maintains water pressure between 10-20 psi (15 psi nominal), which is great for drip tape, soaker hose systems, and any application where low pressure is desirable. It may also be used with drip systems. Low flow rate to save water. Approximately 2.3 GPM (gallons per minute) at 10 psi and 7.0 GPM at free flow. Maximum Inlet Pressure: 125 psi. May be left under constant pressure. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 20 psi if the outlet is completely shut. Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead. Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight. This heavy duty 15 psi lead-free brass pressure reducer regulator is ideally suited for use with soaker hose, drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden faucet in the USA and Canada.