FixMaster 3/16 x 3-1/4" Countersunk Phillips Flat Head Blue Concrete Screw Anchors (100 pcs Screw Kit) with one Screwdriver and Drill Bit for Concrete

FixMaster 3/16 x 3-1/4" Countersunk Phillips Flat Head Blue Concrete Screw Anchors (100 pcs Screw Kit) with one Screwdriver and Drill Bit for Concrete

[PRODUCT] Includes 100 3/16 inch [6/32"] (#10 screw) x 3-1/4 inch long Screw Anchors, 1 Drill Bit & 1 Screwdriver Bit so you are ready to tackle your Commercial, DIY & Home improvement jobs - Heavy Duty General Purpose Versatile Fixing Screws [APPLICATIONS] Concrete Screws can be used for Applications including Concrete Block, Cinder Block, Mortar, Masonry, Brick, Wood, Drywall & Stucco [HIGH QUALITY] A High and Low Thread Design along with Wide Serrated Threads provides a Faster Drilling Speed allowing the Screw Anchor to Quickly Penetrate any Base Material [SELF-TAPPING TECHNOLOGY] A Diamond Point Designed Screw Tip Threads Directly into Base Materials, Eliminating the need for other Anchors or Screws [CORRSOION RESISTANT] A Blue Epoxy Coating can Withstand Hydrochloric Acid Corrosion for 1000 Hours, Ensuring Long Lasting Durability. Anti-Corrosion Coating is especially useful in Hurricane or Damp Environments [MATERIAL] Manufactured from Heat-Treated 1022A High Strength Carbon Steel for Strength and Durability [SERVICE] 100% Customer Satisfaction and Money Back Guarantee & Responsive Customer Support for Returns FixMaster, the unrivalled "Master" of fixings, is creating waves in the Fixings and Fastener space with its superior product quality and unparalleled service. From DIY enthusiasts to seasoned professionals, FixMaster stands out as the go-to brand, showcasing its mastery in delivering fixing solutions you can count on!
Please visit our website for further technical information and to learn about the FixMaster offering https://www.myfixmaster.com/

The Head style is Countersunk Phillips Flat - This will allow the fastener head to lay flush in the base material

The Diameter is 3/16"
The Overall Length is 3.25"
The Thread Length is 2.17"
The Total number of threads is 17

Setting Driver Required & included with each box of Anchors:
FOR 3/16" Diameter - a 1/4" nut driver is required for driving the anchor into the base material

FOR 3/16" Diameter - Each fastener requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with the carbide tipped bit that is included in each box of anchors

Minimum Embedment:
The Minimum Anchor embedment into the Base Material is 1". This means the Anchor must be installed so that a minimum of 1" of the anchor is embedded into the Base Material

Fixture Hole Diameter:
FOR 3/16" - The Hole in the Fixture or Base Material being Fastened must be Larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4"

Spacing between Anchors:
Each anchor must be spaced a Minimum Distance of 3" from each other Anchor when measured center to center

Edge Distance:
FOR 3/16" - Each anchor Cannot be installed any closer than 2-1/4" from an unsupported edge of the Base Material

Maximum Fixture Thickness:
The Maximum Fixture Thickness or the Maximum Thickness of the Material being Fastened for a anchor is 1.75" to 2.25". This will ensure that the Minimum Embedment of 1" will be met