FLYCOLOR Turbo Racing 1:76 Scale Drift RC Car with Gyro Mini Full Proportional RTR 2.4GHZ Remote Control with 2 Replaceable Body Shell (C65-GREY)

FLYCOLOR Turbo Racing 1:76 Scale Drift RC Car with Gyro Mini Full Proportional RTR 2.4GHZ Remote Control with 2 Replaceable Body Shell (C65-GREY)

High simulation headlights, LED light on chassis The high simulation headlights have a spotlight effect and the double flash function. The chassis lamp can be controlled by Channel 3. TAILLIGHTSTOPLIGHTS Cool taillight.During braking, the stoplights are on. THR-Curve upgrade After start-up, the first half (50%) of the accelerator speedsup slowly in a linear way, which is relatively gentle and soft;the second half (50%) of the accelerator speeds up faster,with strong power output; bring more exciting experience and hand feeling of operation and control. Type-C charging port,Battery capacity 55mAh Battery working time is up to 30 minutes, built-in Type-c charging port, suitable for various charging modes; charging time is 40 minutes. TAIL LIGHT STOP LIGHTS Cool taillight.During braking, the stoplights are on. DIY removable car shell The car body shell can be disassembled. 2 car body shells with the original color are given for free. Make your small car by yourself!It's a great Christmas present! Model Name:C65 Drift RC car GREY
Scale: 1:76
Frequency Bran:2.4GHz
Control Distance:30M
Working Time: 30 minutes
Slope angle: 30 degree
Drive mode: two-wheel drive
Proportional steering: proportinal steering
Charging battery: 3.7V 55mAh LiPo
Trim function: Yes
REV: Steering reverse
Color: Blue
What remote conrol can fit this car:Turbo Racing VT system transmitter
1:76 RC car size:60*25.6*17.3mm

Pakcing List:
1* 1:76 C65 Drift RC car
1* P21SVC 4CH remote
2* Car shell without color
1* Stainless Steel screwdriver
1* Type C charging cable
1* Packing box
1* User manual

Troubleshooting steps:
1. Not walking in a straight line: Check if the remote control ST-TRIM is at the center point, and adjust the car to walk in a straight line through ST-TRIM
2. Automatic forward/backward movement of the car: Align the TH-TRIM arrow on the remote control with the center point in the power on state, then turn off the remote control and restart it (reminder: When starting up, do not touch the throttle trigger (trigger) with your hands, which will cause the car to move automatically)
3. When the car runs, it becomes unstable and shakes: If the car is unstable, it may deviate due to terrain and speed issues. If the speed is (100%) fast, the car's grip may be insufficient, resulting in deviation
4. Re code: When the remote control and the vehicle are powered on normally, use the matching code to match the BIND pin hole on the vehicle. The front lights of the vehicle change from flashing to permanently on, indicating that the remote control has successfully paired with the vehicle