LED Flasher Relay 2-Pin, FIX Motorcycle Turn Signal Flasher Relay Flash Rate Wiring Connectors Kit

LED Flasher Relay 2-Pin, FIX Motorcycle Turn Signal Flasher Relay Flash Rate Wiring Connectors Kit

Material - Our 2-Pin Electronic LED Flasher Relay is made of quality ABS to ensure durability and waterproof performance. The interior consists of sturdy copper wire and metal made from, which has good electrical conductivity. You don't need to worry about not being able to use it in harsh environments. Specifications - The operating voltage of this LED flasher relay is DC12V; The rated current of this LED flasher relay is 10A; The power of coil is 150W. If you upgrade from the halogen bulb to the LED bulb, your bulb doesn't blink or blink too fast, you also can replace the old relay with this flasher relay. Application - The LED Flasher Relay suitable for most motorcycles, scooters, ATVs on the market, compatible with Harley, Honda, Yamaha, Suzuki, Kawasaki and other brands, which can fixe the motorcycle turn signal and hazard warning hyper flash or doesn't blink. Installation - To install the Electronic LED Flasher Relay, you just need to connect the 2 pins to the battery. It's really plug and play, no load resistors needed even no tools are required. If the wiring connectors are different, you can remove the white connector to plug in the wires or new connectors directly. Notice - If the LED flash relay does not work or is short-circuited immediately after installation, turn off the power first, and then check whether the red and black wires of the vehicle are connected correctly. Our Flasher Relay is well a quality part

Specifications:

- The rated voltage of this LED flasher relay is DC12V;

- The rated current of this LED flasher relay is 10A;

- The power of coil is 150W;

- Blinking frequency :90 times/min

Compatible with:

- Compatible with Honda CBR600 CB900 CBR1000 VTX1300 VT1300

- Compatible with Suzuki GSX R600 R750 R1100 GSF600S GSF1200S

- Compatible with Yamaha YZF FZ WR

- Compatible with Kawasaki Ninja ZZR ZX VULCAN, etc

Notice:

If the LED flash relay does not work or is short-circuited immediately after installation, turn off the power first, and then check whether the red and black wires of the vehicle are connected correctly.