RP2040-BLE Raspberry Pi Microcontroller Development Board, Based On RP2040 Dual-Core Arm Cortex M0+ Processor, Supports Blue-Too-th 5.1 Dual Mode,

RP2040-BLE Raspberry Pi Microcontroller Development Board, Based On RP2040 Dual-Core Arm Cortex M0+ Processor, Supports Blue-Too-th 5.1 Dual Mode,

RP2040-BLE Development Board, RPi Microcontroller Development Board, Based On RP2040, Supports Blue-too-th 5.1 Dual Mode. This Kit version includes RP2040-BLE Board, with USB Type-C Adapter Board and FPC Cable RP2040 microcontroller chip designed by RPi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of onboard Flash memory. Supports Blue-too-th 5.1 Dual Mode, allows controlling by serial AT commands, with SPP and BLE support Castellated module allows soldering direct to carrier boards. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Adapting 24 × pins including 14 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 14 × controllable PWM channels. Compact size, Separate adapter board design, Castellated holes with immersion gold design, highly integrated packaging, easy to embed into various product applications. Adapting USB Type-C port via adapter board Overview
RP2040-BLE is a mini RP2040 development board, with Blue-too-th 5.1 dual mode function, allowing controlling by serial AT commands for quick start-up, which can realize Blue-too-th wire-less communication.
With 14 multi-function GPIO pins on a very small board and castellated holes on the PCB edge, it is easy and fast to integrate into your project.

Specifications

RP2040 microcontroller chip designed by RPi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
264KB of SRAM, and 2MB of onboard Flash memory
Supports Blue-too-th 5.1 dual mode function
Onboard Blue-too-th module, allows controlling by serial AT commands for quick start-up
Onboard FPC 8PIN connector, adapting USB Type-C port via adapter board
Castellated module allows soldering direct to carrier boards
Drag-and-drop programming using mass storage over USB
Low-power sleep and dormant modes
Adapting 24 × pins including 14 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 14 × controllable PWM channels
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support
Support C/C++, MicroPython, Arduino,Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
Compact size, Separate adapter board design, Castellated holes with immersion gold design, highly integrated packaging, easy to embed into various product applications. Adapting USB Type-C port via adapter board

Package Content
RP2040-BLE x1
USB Type-C adapter board x1
FPC cable ~15cm x1