GOUPRC 30A Brushless ESC 2-3S Speed Controller with 5V/2A BEC & XT60 Plugs for Drone Helicopter Fixed Wing DIY RC Multi-axis Aircraft

GOUPRC 30A Brushless ESC 2-3S Speed Controller with 5V/2A BEC & XT60 Plugs for Drone Helicopter Fixed Wing DIY RC Multi-axis Aircraft

❶▶ 30A ESC electronic speed controller with XT60 connector and 3.5mm bullet plugs, brushless motor controller can power receiver and servos. ❷▶Continuous Current：30A / masterpiece current: 40A / BEC Mode: Linear / BEC Output: 5V/2A / Battery Cell: 2S-3S. ❸▶Remote control programmable settings, powerful ESC protection, start-up protection, temperature protection, throttle code loss protection, over-negative He protection. ❹▶ Low feed angle setting accommodates a wider range of motor. ❺▶ NOTE & Customer Service: Please read the instruction notes carefully before usinig. If you have any question or other problems, please contact us first, we will offer you a great customer servies.

30A Brushless ESC

cont current：30A

Burst Current：40A

BEC Mode：Linear

BEC Output：5V/2A

Battery Cell：2S-4S

Weight：37g

Protection Function:

1.Start up failure protection: If the motor fails to start within 2 seconde of throttle application, the ESC will cut-off the output power. In 

this case, the throttle stick MUST be moved to the bottom again to reboot the motor. (such a situation happens in the following cases: 

The connection between ESC and motor is not reliable, the propeller or the motor is blocked, the gearbox is damaged, etc.) 

2.Over-heat protection: When the temperature of the ESC is over about 110Celsius degrees, the ESC will reduce the output power.

Throttle signal loss protection: The ESC will reduce the output power if throttle signal is lost for 1 second, further loss for 2 seconds will 

cause the output to the cut-off completely.