lizponaza Electric Sheep Shears Heavy Duty Professional Sheep Clippers with Manganese Steel Blades, 2800RPM Adjustable Speed, 63in Flexible Shaft for

lizponaza Electric Sheep Shears Heavy Duty Professional Sheep Clippers with Manganese Steel Blades, 2800RPM Adjustable Speed, 63in Flexible Shaft for

✔ 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐭 𝟏2𝟎𝟎𝐖 𝐌𝐨𝐭𝐨𝐫:This professional electric sheep shears is equipped with a 1200W heavy-duty all copper motor, which makes combing easier and more effortless. High speed of 2800r/min can help you save more shearing time ✔ 𝐒𝐡𝐚𝐫𝐩 𝐃𝐨𝐮𝐛𝐥𝐞 𝐁𝐥𝐚𝐝𝐞:Sharp two blades can quickly cut through various hair, and save shearing time. The upper blade swings from side to side to achieve efficient shearing. The lower smooth combing teeth will protect the skin of the sheep ✔ 𝐀𝐝𝐣𝐮𝐬𝐭𝐚𝐛𝐥𝐞 𝐓𝐢𝐠𝐡𝐭𝐧𝐞𝐬𝐬: You can precisely adjust the tightness of the blades by turning the black knob to shear different thicknesses of wool, giving it a wider range of application scenarios ✔ 𝐇𝐢𝐠𝐡 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲: This professional sheep shears with an all-copper motor has 1200W of high power and offers up to 2800rpm no-load speed to increase efficiency and make your shearing job easier and faster ✔ 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐔𝐬𝐞: The one-touch start switch on the motor lets you easily turn it on/off. This sheep shears can also be adapted to 9-tooth curved blades (not included)or 13-tooth curved/straight blades (not included) for easy blade replacement ✔ 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧: This sheep shears is suitable for shearing various types of sheep, such as sheep, Tibetan sheep, goats, and so on. The sheep shears also applies to alpacas, which blades are particularly suitable for cutting dirty and curly wool

𝐇𝐨𝐰 𝐭𝐨 𝐑𝐞𝐩𝐥𝐚𝐜𝐞 𝐭𝐡𝐞 𝐂𝐚𝐫𝐛𝐨𝐧 𝐁𝐫𝐮𝐬𝐡

1. Loosen the screws with a screwdriver.

2. Replace the old carbon brush with a new one.

𝐇𝐨𝐰 𝐭𝐨 𝐈𝐧𝐬𝐭𝐚𝐥𝐥 𝐁𝐥𝐚𝐝𝐞𝐬

1. Place a 4-tooth blade on the pressure yoke's carrier cones. Please make sure the pressure yoke's carrier cones are suited to the holes provided in the blade.

2. Then push the 9-tooth blade between the two screws and tighten the screws.

𝐒𝐩𝐞𝐜𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬

Color: Red

Blade Material: Manganese Steel

Voltage: AC 110V/60HZ

Power: 1200W

No-load Speed: 2800r/min

Motor Type: All-copper Motor

Product Size: 26*9*10cm/10*3.5*3.9inch

Carrying Case Size: 40*28*11cm/15.7*11*4.3inch

Power Cable Length: 130cm/51inch

Grip Tube Diameter: 4.7cm/1.9inch

Flexible Shaft Tube Diameter: 17.6mm/0.7inch

Flexible Shaft Length: 160cm/63inch

Upper Blade Size: 6*3cm/2.4*1.2inch

Lower Blade Size: 8*5cm/3*2inch

Package Size: 34*42*12cm/13.4*16.5*4.7inch

Net Weight: 5.65kg/12.5lbs

Gross Weight: 5.3kg/11.7lbs

𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐝

1* Electric Sheep Shears 1* Carrying Case 1* Cleaning Brush 1* Special Screwdriver 1* English Manual

𝐍𝐨𝐭𝐞𝐬

1. Please read the manual carefully before use.

2. This product does not contain oil or oil pots. The motor is powerful and must not be used on humans or pets. Before use, lubricate the blades and motor.

3. Adjust the pressure appropriately: too loose and the top blade may detach; too tight and the motor may overheat; too light and it may cause fur clogging.

4. Take short breaks while shearing, clean the blades promptly and do not idle to guard against the blades from overheating, using a cooling spray (not included) every few minutes.

5. Slight color differences and dimensions. Make sure you do not mind before you order.