Fytoo 2PCS 2S 7.4V 600mAh Li-ion Battery with 2-in-1 Charger for XK A280 A160 A300 RC Airplanes Fixed Wing Battery Gliders Aeromodels Aeromodels Toys

Fytoo 2PCS 2S 7.4V 600mAh Li-ion Battery with 2-in-1 Charger for XK A280 A160 A300 RC Airplanes Fixed Wing Battery Gliders Aeromodels Aeromodels Toys

For XK A280 A160 A300 RC Airplane Fixed Wing Battery Glider Aeromodel Toys The battery weight is only 34g/1PCS， Battery size is 63*18*16mm（2.48*0.71*0.64in）,very lightweight and easy for you to carry Charging indication: two 7.4V lithium batteries can be charged at the same time, with independent channel control, and overcharge protection /LED indication is set Charging indicator:：the green light flashes during charging, and the green light stays on when fully charged, and the charging will stop automatically Package included： 2PCS 2S 7.4V 600mAh Li-ion Battery with 1PCS 2-in-1 Charger Note: please pay attention to whether the battery size and plug are suitable for your RC equipment, JST-2P plug.

This battery is suitable for XKA280A160A30RC remote-controlled airplane glider battery, and is compatible with all kinds of remote-controlled cars, RC remote-controlled airplanes, FPV unmanned aerial vehicles, unmanned quadrotor helicopters and RC rowing model remote-controlled engineering vehicles, RC remote-controlled cars and electric toy car batteries

only the voltage, size and plug match can be installed.

Battery Information：
Battery voltage: 7.4V
Battery configuration: 2S
Battery capacity: 600mAh
Discharge rate: 25C
Battery weight: 34g/1PCS
Battery size: 63*18*16mm(2.48*0.71*0.64in)
Discharge connector: JST-2P plug
Charging interface: XH-3P plug
Battery chemistry: lithium polymer

Introduction of charger
Product name: USB smart charger (1 for 2 chargers)
Input parameters: DC 5V 1-2A
Output parameter: DC 7.4V 2X1000mA
Plug model: three-pin balanced charging plug
Rechargeable battery: 2S 7.4V lithium battery Li-PO/Li-ion.

Charging indication: two 7.4V lithium batteries can be charged at the same time, with independent channel control, and overcharge protection /LED indication is set

Battery precautions:
1. Turn off the device when the battery is low to avoid deep discharge.
2. Always disconnect the battery from the device when not in use.
3. Do not use or charge the battery if it is gassed, swollen, leaking, overheated or any other abnormalities
4. Never disassemble, puncture, shock or damage the battery. Do not ignite the battery.
5. Do not overcharge the battery. Improper use, such as short-circuiting or overcharging, may result in explosion or fire.