NOVINO Boat Trailer Bunk Slide Pads and Enders for Easier Launching & Loading, 3" x 10" Boat Trailer Bunk Slicks

NOVINO Boat Trailer Bunk Slide Pads and Enders for Easier Launching & Loading, 3" x 10" Boat Trailer Bunk Slicks

A must have for boat trailers: The boat trailer bunk slides pads will definitely launching and loading boat on and off trailer quickly with minimal effort.Makes loading and unloading the boat on/off the ramp much easier! Fit for almost any bunk trailer,includes 2", 4" 6" boat trailer bunk slides.Boat weight limitation: 1,500 lbs for fiberglass boats, 4,000 lbs for metal boats Works on bunk trailers for unpainted bottom boat pontoon boat/jon boats/jet ski/seadoo/waverunner/fishing boats. It’s not recommened for painted bottom boat,because may scratch the bottom paint. Our boat trailer slides for bunk are with recessed screw holes for a firm mount. Just be make sure the screws drop into countersink area to prevent scratching the boat hull. Don’t release the boat from the trailer hookup until the boat backed into the water.Just remember unhook boat before taking boat out of water.Because the boat trailer slides for bunks are very slick and your boat will slide off on a steep boat launch. More warm tips pls see below information and instruction. High quality boat slides trailer bunk slides are made by high-density polymer plastic to meet marine environment

Boat weight limitation:
Metal boats without painted bottom weighing up to 4000 pounds
Fiberglass boats without painted bottom weighing less than 1500 pounds

It’s not recommened for painted bottom boat,because may scratch the bottom paint.

Works on bunk trailers for unpainted bottom boat pontoon boat/jon boats/jet ski/seadoo/waverunner/fishing boats.

A must have for boat trilers:
The bunk slides for boat trailer will definitely launching and loading boat on and off trailer with ease. The boat trailer slide kit decrease friction between hulls and bunks to makes launch and retrieve the boat on/off the ramp much easier!

No carpet on the bunks anymore and no jumping in& hard pushing off the trailer.

3-5 minutes slide on/off job done:
Just take the boat to the marina, then back the truck down to the water, release the cable holding the boat to the trailer slowly, finally boat slide down smoothly and into the water.

Package includes: 8pcs 3" x 10" Boat Trailer Bunk Slides Pads + 2pcs 3" x 10" Boat Trailer Bunk Enders(to protect the end of the bunks) + Stainless Steel Mounting Screws

Warm Tips:
Don’t release the boat from the trailer hook before taking boat out of water.
Keep winch strap connected&locked boat from the trailer until it is in the water.Otherwise boat may will slide off trailer.
The screw should be tighteded gently as over-tightening may damage the marine trailer bunk slides pads.
Make sure screws and screws heads should be below the surface of the pads and in the molded holes to prevent scratching of the hull