JOYLIT 24V 32.8FT/10M COB LED Strip Lights 120° 2700K Warm White Indoor 384LEDs/M High Density 7650LM Super Bright CRI 90+ Dotless Adhesive LED Tape

JOYLIT 24V 32.8FT/10M COB LED Strip Lights 120° 2700K Warm White Indoor 384LEDs/M High Density 7650LM Super Bright CRI 90+ Dotless Adhesive LED Tape

[ Upgraded 120° COB LED Strip ]: New COB LED strip that add 2 white lines besides the light source to narrow the beam angle, compares with same parameter 384LEDs/M 32.8FT LED Strip 180°, the 180° illuminated surface appears larger but also much darker, and 120° illuminated a more linear and concentrated,brighter light [ Without Voltage Drop ]: This 24V 32.8FT COB LED strip adopt no voltage drop design, which means that the entire 32.8ft long LED strip is almost uniform in brightness from beginning to end, will not decrease in brightness with increasing length. The brightness and color temperature are consistent [ Great Lighting Effect ]: 384 LED/M high density design, each diode is very close that emitting a bright, spotless lighting effect; combined with a high color rendering index of 90 +, strong color reproduction ability makes the object look vivid and attractive. After installing this light strip, it immediately improves the atmosphere of the place [ High Quality LED Strip ]: 32.8ft/10M LED strip is a combination of 20 pieces 1.64FT/50CM short LED strips, compared to no welding continuous LED strips, our PCB board copper content has 1.5 times higher than the solderless version, better heat dissipation, less voltage drop, and moer durable, aslo brighter [ Dimmable LED Strip ]: By adding a LED dimmer between 24V power supply and LED strip, we can adjust the brightness from 0-100% smoothly, PWM dimmer such as remote control dimmer, APP control, etc, and 0-10V Triac dimmer optional, please consult if choose triac dimer solution. ( LED dimmer sold separately ) [ Easy to Use ]: Stronger adhesion adhesive back tape, just peel off the protect film then stick to a dry, clean and smooth place, holds firmly; there are 15CM red and black wire at both ends to connect to the 24V LED driver. A 24V 5A power supply is recommended but sold separately. 32.8FT COB LED Strip is a upgrade CHIP-ON-BOARD technology, it creates a totally smoother, seamless continuous line of light. The superior design will not show visible dots or hot spots, making it ideal illumination for reflective surfaces such as granite counter tops and tile floors,or narrow applications like jewelry cases and backlighting.

Features:
*90+ CRI--with high cri of 90+, this white tape light is a great solution for places where quality color rendering is needed, such as jewelry shop, makeup vanity, supermarket, kitchen cabinets etc;

Flexible & Cuttable--Every 3.1cm/1.22IN cuttable and we can using 8mm 2pin connector to re-connect the rest led strips,suitable for any diy length;

Technical Specification:

Light Source: COB LED Strip
Power: 10W/M; 96W Max
Color Temperature: 2700K±100K
Viewing Angle: 120 degrees
Operating Temperature: -25~60°C
Working Voltage: 24V DC
IP Rating: IP20 Non Waterproof
Package Include: 32.8ft White COB LED Strip Light