HiPicco FR4-2RS Flanged Ball Bearing, ID 1/4" x OD 5/8" x Width 10/51 Miniature Bearings, Double Rubber Sealed Deep Groove Bearings, Pre-Lubricated (

HiPicco FR4-2RS Flanged Ball Bearing, ID 1/4" x OD 5/8" x Width 10/51 Miniature Bearings, Double Rubber Sealed Deep Groove Bearings, Pre-Lubricated (

Model: FR4-2RS ABEC1 Flanged Bearings,(I.D.=1/4", O.D.=5/8", Thickness=10/51, Flange Dia: 0.69"); Advantage: Rubber sealed on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities. Material: Made of chrome steel (GCr15), durability and resistance to under heavy loads High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load. Application: FR4-2RS Miniature Inch ball bearings are widely used in various industries and application for Miniature Engines, Robotics, Dental Equipment, Watches, 3D Printers, Testing Instruments, Pressure Rotors and other fields.

Specification：

• Model: FR4-2RS
• Seal Type: Double Sealed
• Inner Race/Outer Race Material: Chrome Steel (GCr15)
• Cage Material: Stamping Steel
• Inner Diameter (d): 1/4"
• Outer Diameter (D): 5/8"
• Thickness: 10/51
• Accuracy Class: P0 (ABEC-1)
• Noise Level: Z2
• Number of Pack: 4 Pcs

Feature:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings.
• With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance

Selecting Guide:

• Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
• Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.