maXpeedingrods Rear Suspension Enhancement System for Dodge Ram 2500 2WD 4WD 2014-2025 Rubber Helper Spring Kit

maXpeedingrods Rear Suspension Enhancement System for Dodge Ram 2500 2WD 4WD 2014-2025 Rubber Helper Spring Kit

Fitment - This suspension helper spring kit fits for Dodge Ram 2500 2WD 4WD 2014-2025 Easy to Install - These rubber springs are the direct replacements of the bump stop in the original vehicle, no drilling required, no hardware needed, you can install them using basic hand tools Easy to Use - This helper spring kit is of no need for air lines or compressor, and it will automatically adjust when riding on uneven road and keep the vehicle level at all times Reliable Performance - There are no need to fill air to these hollow rubber springs, which means you don't have to worry about air leaking and the maintenance is super easy More Comfort - Up to 8600 lbs additional support for you vehicle, each rubber spring works independently, providing smooth and stable ride especially when hauling off-center loads

Application

for RAM 2500 2WD 2014 – 2025

for RAM 2500 4WD 2014 – 2025

Specification

Condition: Brand New

Drilling Required: No

Material: Rubber Spring

Placement on Vehicle: Rear left and right

Load capacity: Up to 8600 LBS

Design height: 114 mm

Stroke: 48 mm

Max. Extended: 114 mm

Min. Compressed: 66 mm

Package includes (as the picture shows)

2x Pre-Assembled Rubber springs

1x Installation instruction

Hardware needed to install

Features

1. Ease of installation: Directly replace the bump stop of the original car.

2. Ease of use: Requires zero maintenance,  no need for air lines and compressors

3. Reliability: No air leaking

4. Stability: Reduce the sag of the rear end of the car and soften sharp rebounds.

5. Quality: High-quality rubber that has been verified many times.

Note

1. This product will not increase the load capacity of your vehicle.

2. Do not exceed the manufacturer's recommended weight limit.

3. All modifications must be installed by qualified personnel and in compliance with your local modification regulations.

4. It is necessary to ensure that there is at least 1/2" of gap between the kit and the frame when the car is empty.

5.Installation instruction included.