Temperature Humidity Controller Relay Output Digital Thermostat Humidistat Control Module with Indicator Light

Temperature Humidity Controller Relay Output Digital Thermostat Humidistat Control Module with Indicator Light

SIMPLE TO USE: This temperature humidity controller is easy to use. When the start temperature is greater than the stop temperature, enter cooling mode C; When the start temperature is lower than the stop temperature, enter heating mode H. COOLING MODE & HEATING MODE: When detection temperature is ≥ start temperature, the cooling equipment starts working; When detection temperature is ≤ stop temperature, the cooling equipment stops working. When detection temperature is ≤ start temperature, the heating equipment starts working; When detection temperature is ≥ stop temperature, the heating equipment stops working. RELAY OUTPUTS: The digital thermostat humidistat control module adopts relay outputs, which can control temperature and humidity, meeting various needs. The temperature and humidity controller is designed with indicator light and the working status is clear and intuitive. HOW TO SET START AND STOP HUMIDITY: 2. In the running interface, press and hold the RH- key for more than 3 seconds to enter the stop humidity setting interface. Testing can be done by modifying parameters using the RH+ RH- key. After the parameter modification is completed, wait for 6 seconds to automatically exit and save. HOW TO SET START AND STOP HUMIDITY: 1. In the running interface, press and hold the RH+ key for more than 3 seconds to enter the startup humidity setting interface. During testing, parameters can be modified using the RH+ RH- key. After the parameter modification is completed, wait for 6 seconds to automatically exit and save. Spec:
Item Type: Temperature Humidity Controller
Material: ABS
Model: XY WTH1
Temperature Measurement Range: -20℃ to 60℃
Humidity Range: 00% to 100% RH
Control Accuracy: 0.1℃ 0.1% RH
Detection Probe: Integrated sensor
Output Type: Relay output
Output Capacity: Up to 10A
Temperature Correction Function OFE (-10.0℃ to 10.0℃):
If the system works for a long time, there may be deviations. By using this function to correct, the actual temperature=measured temperature+calibration value;
How to set the start and stop temperature:
1. In the running interface, press and hold the TM+ key for more than 3 seconds to enter the startup temperature setting interface. Testing can be done by modifying parameters using the TM+ TM- key. After the parameter modification is completed, wait for 6 seconds to automatically exit and save.
2. In the running interface, press and hold the TM- key for more than 3 seconds to enter the stop temperature setting interface. Testing can be done by modifying parameters through the TM+ TM- key. After the parameter modification is completed, wait for 6 seconds to automatically exit and save.
The humidity function is as follows:
1. Automatic recognition of working mode:
Automatically identify the working mode based on start or stop humidity.
Start humidity > stop humidity, dehumidification mode d ; Start humidity < stop humidity, humidification mode E.
2. Dehumidification mode:
When the detection humidity is ≥ start humidity, the relay is connected, the green indicator light is on, and the dehumidification equipment starts working.
When the detection humidity is ≤ stop humidity, the relay is closed, the green indicator light is off, and the dehumidification equipment stops working.

Package List:
1 x Temperature Humidity Controller