AITIAO 4PCS Pre-Soldered GY-521 MPU-6050 MPU6050 Module 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor for

AITIAO 4PCS Pre-Soldered GY-521 MPU-6050 MPU6050 Module 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor for

Pre-solder: Solderless! Pins are already attached. Ready to plug in and go. GY-521 MPU-6050 module: Communication mode: standard IIC communication protocol; The accelerometer can be operated at both 3.3V and 5V; Compatible with Raspberry Pi The MPU-6050 Parameter: Gyroscopes range: +/- 250 500 1000 2000 degree/sec; Acceleration range: ±2 ±4 ±8 ±16g; Transmission can pass I2C up to 400kHz or SPI up to 20MHz Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs Universal usable: the sensor can be applied to develop various entertaining applications and systems; Nice for projects with gaming and virtual reality devices, navigation (for drones and RC planes) and DIY robots

Features:

1.The item is set MPU-6050 module 3 axis gyroscope accelerometer module compatible with Raspberry Pi etc.

2.The MPU-6050 module adopts the standard IIC communication for communication and is powered by 3V-5V for sustainable use.

3.The module is nice for experimental and model structures compatible with Raspberry Pi.

4.Even better, this product is ready to be plugged in since it already has soldered pins.

Specification:

• Model: GY-521
• Main Chip: MPU-6050
• Power supply: 3~5V
• Pin pitch : 2.54 mm
• Material: PCB
• Size: as the pictures shown
• Gyroscope range: ± 250 500 1000 2000 ° / s
• Acceleration range: ± 2 ± 4 ± 8 ± 16 g
• Communication mode: standard IIC communication protocol
• Chip built-in 16bit converter, 16bit data output

Pins:

• VCC: This pin is used for Supply Voltage. Its input voltage is +3 to +5V.
• GND: This pin is used for ground.
• SCL: This pin is used for clock pulse for I2C communication.
• SDA: This pin is used for transferring data through I2C communication.
• Auxiliary Serial Data (XDA): It can be used for other interfaced other I2C modules with MPU6050.
• Auxiliary Serial Clock (XCL): It can also be used for other interfaced other I2C modules with MPU6050.
• ADO: If more than one MPU6050 is used for a single MCU, then this pin can be used to vary the address.
• Interrupt (INT): This pin is used to indicate that data is available for MCU to read.

Package Included:

• 4 x GY-521 MPU-6050 3 axis accelerometer gyroscope sensor modules

Note:The mention of brand names and any related models above is only for purposes of demonstrating compatibility.