ADDMOTOR Electric Bicycles E-Bike Disc Brake Pads M-430/M-66/M-550/M-560/M-70 Bikes

ADDMOTOR Electric Bicycles E-Bike Disc Brake Pads M-430/M-66/M-550/M-560/M-70 Bikes

High quality disc brake pad with low noise and excellent power modulation Feature - fine appearance, good braking effect, noiseless, wear-resistant, security, stable, comfortable, and convenient Quality cycle brake pads - our products have passed strict inspection and control, and are without, iron and harmful substances Material - brake pads are composed of Ceramic Semi-metallic, which has stronger braking performance, wear resistance, and noise reduction than others; They have good stability and the friction coefficient is not easy to change Please directly look at the shape of your original brake pads. If the shape is the same as the original brake pad shape, you can use it Occasionally, the brake pads cannot be installed in because of the clearance is too narrow. The solution is to press the piston back with the hydraulic brake pistion press. When replacing the brake pads of the hydraulic brake, do not pinch the brake handle after removing the old brake pads, otherwise the piston will fall off and leak oil. When the brake pads rub against the disc, use the clearance adjuster to make the distance between the disc and the brake pads on both sides the same. When your brake caliper is wire controlled, you can adjust the clearance between the disc and the brake pad by adjusting the screws on the back of the caliper. When your brake makes a strange noise, it means that the brake disc is dirty by oil. You need to use special disc cleaner to clean the disc or replace the disc.How to Choose Bike Disc Brake Pads ?If you do not know whether it is compatible with your brakes, please directly look at the shape of your original brake pads. If the shape is the same as the original brake pad shape, you can use it.These resin and semi-metallic pads are for lighter weight riders, and riding where lots of brakes are not required, like cross country, and riding in flatter areas. They also have a large amount of initial grab and are much quieter. I know I hate brake squeal, and I'm sure you do too. One big disadvantage of these pads is that they wear out quicker. Also don't run these pads when it is muddy, wet, or even very dusty conditions.These metal pads and sintered copper-based pads will be better if you are a heavier rider. These pads are recommended for riding in wet, muddy, or dusty conditions. Although they are more noisy, and do not have as much of an initial bite as organic pads, you will definitely notice the increased performance at the end of your run.