WYDDDARY Pellet Machine 4MM 220V Chicken Feed Pellet Mill Machine 4.5KW Animal Feed Mill Pellet Machine with Three-Head Pressure Roller Maximum Output

WYDDDARY Pellet Machine 4MM 220V Chicken Feed Pellet Mill Machine 4.5KW Animal Feed Mill Pellet Machine with Three-Head Pressure Roller Maximum Output

Multiple Sizes Available: This Chicken Feed Pellet Mill Machine can quickly make chicken feed, grinding disc hole diameter is 4MM. We provide other diameter of holes plate for you to choose,such as 2mm, 3mm, 5mm, 6mm, 8mm, 10mm, 12mm. The rollers and grinding discs of this product are hardened at high temperature and are very wear-resistant and durable. Maximum output is 200kg/h. The machine is available in a variety of colors and shipped randomly Copper Core Motor: The Animal Pellet Feed Mill Machine adopts high quality copper core motor with small heating, not hot hand and sufficient power, which can quickly produce feed. The pellet mill machine is equipped with a voltage equipped with a voltage display, which can visually see whether the voltage is stable Nutrition & Safe: Corn particles can be put into the machine directly. The feed processed by the machine is smooth and has moderate hardness. The temperature-change during the process is slight so the nutrition can be contained very well. The microorganism and parasite can be killed in the process of machine extrusion Excellent Design: The machine adopts the design of enlarged feed port, which makes it more convenient to feed and effectively. With 3 adjustable nuts to adjust the distance between the roller and the grinding disc. When making pellets, the 3 adjustable nuts must be balanced to avoid damage to the pressure roller and grinding disc. The outlet has a regulator that can be adjusted to control the feed length Application: Feed granulator is mainly suitable for producing feed for chickens, ducks, fish, cattle, sheep and horses. It can produce feed for corn kernel, grass feed, soybean meal and other crops. The feed pellet mill machine is widely used in grain feed processing plants, livestock farms and feed processing plants, etc Note: Our machine is not equipped with a plug. It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply, different situations may occur, and the wires are not durable. The wires will gradually burn out over time. (If there are occasional situations with plugs, it is also recommended that you remove the plugs when wiring)

The machine is available in a variety of colors and shipped randomly.

Precautions

1.When using, it should be noted that there should be no foreign matter such as stones and ironblocks in the raw materials. After the pellet machine has been working continuously for morethan ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oilhole need to be filled with high-temperature lubricating grease to make the pressure roller Goodworking performance and extended bearing life.

2.During granulation, it is strictly forbidden for the pressure roller to contact with the templateto run idly, and the continuous feeding can not be interrupted.At the same time, the pressureroller shaft nut is locked to avoid loosening and damaging the spindle keyway.

3.When granulating, there is no granulation, no discharge, the template should be removed, andafter opening one by one, some fiber feed can be added appropriately to restart the granulation

4.Always check the tightness of the screws in each part of the machine. If there is oil leakage inthe gearbox,replace the oil seals in time, and check whether the bearings in the machine headare short of oil.

5.When the pellet machine is working, do not reach into the feeding port with your hands. Ifnecessary, use wooden sticks to help feed the pellets.

6.Before turning on the machine, it is necessary to add less material before turning on the

machine. When shutting down, leave a small amount of feed in the machine to prevent the pressroller of the machine from contacting the template from idling.

7.If the machine is stuck in operation, stop it immediately, press the pressure roller until thebolt is flat, and then restart the machine.

8.Each time the work is completed, the adjusting pressure roller bolts must be loosened.