Bisida 13S BMS 48V 30A Li-ion PCB Protection Board with Balance Wire and NTC, Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (

Bisida 13S BMS 48V 30A Li-ion PCB Protection Board with Balance Wire and NTC, Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (

MULTIPLE PROTECTION Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc. OPERATING TEMPERATURE Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. NOTICE Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge. WIRING METHOD The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack. EXCELLENT SOLUTION Bisida's BMS is manufactured using excellent protective integrated circuit IC and excellent Mosfet, making it robust, long-lasting and reliable

Product size: 50mm*90mm*8mm

Voltage Value: 48V

Charger Voltage: 54.6V

Working Current: 30A

Charging current: Recommended below 5A

Temperature protection: -20 ~ 70 ℃

Applicable Battery:

3.7V lithium ion Battery (Single Cell)

Instantaneous CurrenT: 3 to 5 Times the working current.

Package Contents:

Battery Protection Board*1

Cable*1

Please note:

Our products use the integrated IC solution.

It means that the SOC accuracy of the BMS is very high, and the voltage of each string will be collected. It must be required that the voltage, internal resistance, and capacity must be the same height during assembly, otherwise the BMS will disconnect and protect (disconnection protection function).

This product is an industrial semi-finished product, which needs to be repaired and assembled by people with professional electrical knowledge. Thank you for your understand.