MAPLE ACE UCP204-12 Pillow Block Bearing 3/4" Bore, 2-Bolt, Self-Aligning, R3 Triple Lip Seal, Heavy Duty (Qty 2)

MAPLE ACE UCP204-12 Pillow Block Bearing 3/4" Bore, 2-Bolt, Self-Aligning, R3 Triple Lip Seal, Heavy Duty (Qty 2)

Exclusively Produced by High Standard Factories Ideal for Replacement and OEM Applications Specializing in the Exclusive Production of Bearings with High Performance, High Speed, Less Vibration, Low Noise, and Long Life DESIGNED FOR HEAVY-DUTY AND COMPATIBLE WITH EXTREME CLIMATE 100% SATISFACTION GUARANTEED This UCP PILLOW BLOCK MOUNTED BEARING consists of an INSERT BEARING and a CAST IRON housing. The INSERT BEARING has Triple-Lip Seal: Unmatched protection in highly contaminated environments. Ensures significant bearing lifespan in severe dust, sand, slurry, and water. Bearing is Pre-Lubricated with High-Quality Grease, ideal for use in High and Low-temperature settings. Has a Set Screw Lock on its surface for securing the shaft. The PILLOW BLOCK can be mounted on levelled surfaces using the Two Bolt Holes. Grease Fitting Offset on top to Relubricate the bearing. - Specification: Item UCP204-12R3, Series UCP200, Bearing Number UC204-12R3, Housing Number P204, Bearing Bore Diameter Metric 19.05 mm, Bearing Bore Diameter Inch 3/4 in, Bearing Width Inner Ring Matric 31.00 mm, Bearing Width Inner Ring Inch 1.220 in, Bolt Size 3/8 in, Number of Bolts 2, Bolt Hole Center to Center (e) Matric 95 mm, Bolt Hole Center to Center (e) Inch3.74 in, Overall Length (a) Matric 127 mm, Overall Length (a) Inch 5.00 in, Overall Height (w) Matric 64 mm, Overall Height (w) Inch 2.520 in, Overall Width (b) Matric 38 mm, Overall Width (b) Inch 1.496 in, Mounting Surface to Shaft Center (h) Matric 33.3 mm, Mounting Surface to Shaft Center (h) Inch 1.311 in, Dynamic Load Rating Cr 12700 N, Static Load Rating Cor 6550 N, Limiting Speed 8500 r/min, Clearance Normal, Bearing Sealing type R3 Triple-Lip Seal, Lubrication Type Grease Shell RL2, Lubrication Temperature -20°C to +160°C, Rolling Element Indicator Ball, Bearing Material Gcr15, Housing Material H200 Cast Iron, Locking Type Set Screws, Weight 0.600 KG.