MATEKSYSSYS AP Periph CAN Node - CAN-L431-0.6

MATEKSYSSYS AP Periph CAN Node - CAN-L431-0.6

dummyThe Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver library to convert ArduPilot-supported GNSS, Compass, Barometer, Airspeed sensor, and GPIO-based (PWM, Buzzer/LED notify) peripherals to DroneCAN bus peripherals.Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing dummyThe Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver library to convert ArduPilot-supported GNSS, Compass, Barometer, Airspeed sensor, and GPIO-based (PWM, Buzzer/LED notify) peripherals to DroneCAN bus peripherals.Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC UnboxingFeaturesArduPilot AP_Periph MatekL431-Periph, or MatekL431-Airspeed FirmwareCAN transceiver data rates up to 5 Mbit/s in the CAN FD fast phase4.5-5.5V Voltage RangeLED Indicators3 UARTsUSE BULLETED FEATURE HERE IN BOLD CAPS.Add additional feature descriptions here to describe the above.USE BULLETED FEATURE HERE IN BOLD CAPS.Add additional feature descriptions here to describe the above.SpecificationsFirmware: ArduPilot AP_Periph MatekL431-Periph, or MatekL431-Airspeed (Update via DroneCAN GUI Tool)I2C: 1 (for peripheral Airspeed sensor) (for peripheral Barometer) (for peripheral Compass QMC5883L)ADC: 4x (BATT_VOLT, PIN 5) (BATT_CURR, PIN 6)( BATT2_VOLT, PIN 15) (BATT2_CURR, PIN 16)LED: (Blue, Fast blinking, Booting) (Blue, Slow blinking, working) (Red, 3.3V indicator)UARTs: 3 (UART1, spare) (UART2, MSP default, DFU) (UART3, GPS default)CAN transceiver data rates: up to 5 Mbit/s in the CAN FD fast phaseCAN, DroneCAN Protocol: 1 (2x GH-4P connectors in parallel)JST-GH-6P(SM06B-GHS-TB) for UART3+I2C: 1Input voltage range: 4.5~5.5V @5V pad/pinJST-GH-4P(SM04B-GHS-TB) for CAN: 2JST-GH-4P(SM04B-GHS-TB) for I2C: 1Operating Temperatures: -20~80 °CGPIO with TIM16 for the buzzer: 1MCU: STM32L431xC, 256KB FlashST debug, SWCLK & SWDIOSPI: for peripheral RM3100Power consumption: 40mABoard Size: 26x26x6mmPWM outputs: 5Weight: 3.7gIMPORTANT NOTESInsert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."Recommended (Not Inc