OtpOutopa Stainless Steel Car Exhaust Square Tip, 2.5" to 3.7" Universal Car Exhaust Pipe Tail Throat Tail Pipe, Modification Tailpipe Flue Muffler

OtpOutopa Stainless Steel Car Exhaust Square Tip, 2.5" to 3.7" Universal Car Exhaust Pipe Tail Throat Tail Pipe, Modification Tailpipe Flue Muffler

[ Main Function ] --- Prevent deformation, universal car exhaust pipe also has the effect of supercharging to spoil the flow, which makes the sound of the exhaust pipe slightly soft and reduces the noise to a certain extent. And the exhaust tailpipe tip with a mesh can also prevent foreign objects from entering the tail pipe. [ Reliable Material ] --- Stainless steel car exhaust tip has excellent toughness, corrosion resistance and high temperature resistance. Protect your original pipe from sun and rain. There is a drainage hole at the bottom of the exhaust nozzle, which is not easy to accumulate water and effectively avoid rusting. [ Wide Application ] --- ​​Universal fit for vehicles with an outside diameter of less than 2.5 inches for the exhaust pipe interface. Please measure the outside diameter of your car exhaust pipe interface before purchasing. [ Design ] --- Stainless exhaust square tip. With rolled edges and bevel cut design, and a square tail throat tail pipe. [ Easy Installation ] --- Ideal for DIY, perfect replacement of old or damaged exhaust nozzles. Just use a wrench to fix the screw to the proper position of the exhaust pipe. If you think it is not tight enough, then additional welding will be a good protective measure. WHAT DOES THE EXHAUST TIP DO?
1. Protect Your Original Tailpipes: Being installed to prevent deformation and oxidation of your exhaust pipe.
2. Exquisite tail throat with stylish design and bright color, provides a stylish look for your vehicle instead of the rusted old tailpipe. 
Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage.

Included Accessories:
Stainless steel exhaust tip x 1
Wrench x 1

Installation Steps:
Step 1: Clean the surface of your tailpipe. 
Clean the dirt and sand on your tailpipe with penetrating oil and a shop rag.

Step 2: Slide the exhaust tip into your tailpipe.
Try to slide the tip onto the exhaust pipe. You will probably meet some resistance, so use automotive grease to lubricate the pieces if necessary. Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.

Step 3: Fasten the exhaust tip.
Tighten screws and clamps to secure the exhaust tips. Should you worry that it is not tight enough, you can weld a joint between the edges of the tailpipe and the exhaust tip.

Finally, the installation is complete.

Note:
1. Universal fit for vehicles with an outside diameter of less than 2.5 inches for the exhaust pipe interface. Please measure the outside diameter of your car exhaust pipe interface before purchasing.
2. Please check your original tail pipe type. Straight tailpipe is for straight type, and curved tailpipe is for curved type.

Daily Maintenance:
In order to prolong the service life of the exhaust pipe, please clean the cement, ash and sand regularly to keep the surface clean. We recommend to do above action once a month.