SAIBOYA DTF Ink 500ml Combo Pack Compatible for printheads Installed DTF Printers L1800 R1390 ET-4800 8550 XP15000 I3200 4720 XP600 TX800 ET2800,(2*

SAIBOYA DTF Ink 500ml Combo Pack Compatible for printheads Installed DTF Printers L1800 R1390 ET-4800 8550 XP15000 I3200 4720 XP600 TX800 ET2800,(2*

Compatible with:ET Head L1800 L805 R1390 4720 I3200 XP600 DX7 DX5 5113 1430 TX800 P400 P408 P640 P600 P608 P800 P5000 P6000 R1800 R1900 R2000 R2400 4800 4880 8500 8550 4900 7880 7890 R3000 R3880 F2000 F2100 F2200 P700 P900 XP-15000 L801 L800 L850 T50 T60 R290 RX610 690 R200 R210 R220 R300 R310 R340 R350 and more Printing effect: fine lines can be perfectly rendered, color patterns are brightly colored, large color block areas do not break the line, white ink and color ink do not penetrate each other, and the white background can perfectly cover the color patterns Ink capacity: white ink, black and color ink ,Good ink fluency, no line breakage and no head blockage Tips:Please shake well before use, it is recommended to add stirring equipment to prevent possible precipitation after a long period of non-use, the stirring and circulation system of white ink should be noted whether it is normally opened and used, it is recommended to test a nozzle status chart every morning and evening to find abnormalities and deal with them in time If you have not used our ink before suggest you buy a small capacity set first to try, if you encounter problems please tell us first, we will provide you with technical support within 24 hours Common problems with hot stamping paint ink 1. Suitable materials for hot stamping Materials such as cotton, polyester cotton, leather, etc. that can be combined with hot melt adhesive. 2. Suggested usage environment for ink The temperature is 15-30 ℃ and the humidity is 50-80%. For areas without heating, it is best to warm the ink back to the recommended printing temperature and maintain appropriate humidity according to the environment. 3. Suggested storage environment for ink Ink must be stored in a clean, cool, and dry place with a temperature of 5-30 ℃ and a relative humidity of 40-80%. 4. Suggested storage environment for PET film It must be stored in a clean, cool, and dry place, with a temperature of 5-30 ℃ and a relative humidity of 40-80%. The product has a shelf life of 12 months when unopened and stored in good condition. After opening, please use the PET film as soon as possible. If it is not used up, please seal and store it to prevent moisture. 5. Suggestions for setting the powder shaker The heating temperature of the front desk version is 40-90 ℃, and the temperature in the drying tunnel is set at 130-145 ℃. The baking time varies depending on the printing speed and powder melting effect (3-5 minutes) 6. Transfer conditions Suggested temperature: 150-170 ℃, time: 8-15 seconds/time In the actual use process, the specific transfer time can be adjusted according to the customer's use of changing environments, equipment, substrate fabrics, and related consumables. Can I tear it off and reset it? No, hot stamping is high-temperature transfer printed on clothing and cannot be reused.