DIY Rabbit Milwaukee Bit Holder for M12 Gen 3 Fuel Impact Drivers with 7 Magnetic 1/4 Hex Bit Set Organizer. Custom Made for M12 Fuel 3453-20 & 3404-

DIY Rabbit Milwaukee Bit Holder for M12 Gen 3 Fuel Impact Drivers with 7 Magnetic 1/4 Hex Bit Set Organizer. Custom Made for M12 Fuel 3453-20 & 3404-

𝐌𝟏𝟐 𝐌𝐚𝐠𝐧𝐞𝐭𝐢𝐜 𝐁𝐢𝐭 𝐇𝐨𝐥𝐝𝐞𝐫 - This Milwaukee bit holder is custom made For the Milwaukee M12 Fuel Gen 3 Impact & Drill Driver CAT NO 3453-20 & 3404-20 - It keeps your Milwaukee power tools bit set organized and a cool addition to your Milwaukee accessories. 𝐇𝐨𝐥𝐝𝐬 𝟕 𝐁𝐢𝐭𝐬 - 3 shallow 1/4 hex bits slots in the back, 3 deep slots and one long 1/4 inch impact extension bit holder slot in the front. Bits are not included. 𝐒𝐮𝐩𝐞𝐫 𝐓𝐨𝐮𝐠𝐡 & 𝐈𝐦𝐩𝐚𝐜𝐭 𝐑𝐞𝐬𝐢𝐬𝐭𝐚𝐧𝐭 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥 - The bit holder is made of impact and shock absorbing 3D printed material that will not break under heavy use. It Includes 4 x super strong magnets. The magnets will not fall out even under heavy impact drill operation. 𝐒𝐞𝐜𝐮𝐫𝐞 𝐓𝐨𝐨𝐥 𝐀𝐭𝐭𝐚𝐜𝐡𝐦𝐞𝐧𝐭 - The bit holder attaches to the Impact drill driver via a stainless steel screw and a dual anti rotation support for a virtually wiggle free attachment. 𝐕𝐢𝐛𝐫𝐚𝐭𝐢𝐨𝐧 𝐑𝐞𝐬𝐢𝐬𝐭𝐚𝐧𝐭 𝐌𝐨𝐮𝐧𝐭𝐢𝐧𝐠 𝐒𝐜𝐫𝐞𝐰 - The included stainless steel screw comes with pre-applied thread locker compound to prevent the screw from backing out under the heavy impact drill operation. 𝐌𝐨𝐦𝐞𝐧𝐭𝐚𝐫𝐢𝐥𝐲 𝐒𝐭𝐨𝐫𝐞𝐬 𝐘𝐨𝐮𝐫 𝐅𝐚𝐯𝐨𝐫𝐢𝐭𝐞 𝐒𝐜𝐫𝐞𝐰𝐬 𝐎𝐧 𝐓𝐡𝐞 𝐅𝐥𝐚𝐭 𝐒𝐢𝐝𝐞 𝐒𝐢𝐝𝐞 - Store Screws like wood screws, Philips, Posi, Flat, Square and Torx drive screws. It’s a perfect companion for the Milwaukee Packout screw storage organizer. 𝐌𝐚𝐝𝐞 𝐈𝐧 𝐓𝐡𝐞 𝐔𝐒𝐀. 𝐎𝐧𝐞 𝐘𝐞𝐚𝐫 𝐖𝐚𝐫𝐫𝐚𝐧𝐭𝐲 - The warranty covers replacement due to manufacturing defect.

Introducing the Milwaukee M12 Gen 3 bit holder by DIY Rabbit. It is custom made to mount on the M12 Gen 3 Fuel Impact & Drill Driver Cat No 3453-20 & 3404-20  

✔ The form of the bit holder precisely hugs the contour of the M12 providing an efficient 7 bits storage space. 

✔ 3 shallow 1/4 hex bits slots in the back, 3 deep slots and one long 1/4 inch impact extension bit holder slot in the front.
    The bits are held securely in place via strong neodymium magnets.

✔ Due to its magnetic nature, screws can be momentarily stored on the flat side of the bit holder as shown in the listing photo.
    Store Screws like wood screws, Philips, Posi, Flat, Square, and Torx drive screws. It’s a perfect companion for the
    Milwaukee Packout screw storage organizer.

✔ The housing is made out of tough impact-resistant plastic 3d printed plastic.

✔The bit holder attaches securely to the tool via stainless steel screw and dual anti-rotation support for virtually wiggle free mounting.

✔The stainless steel screw is coated with threadlocker compound to prevent the screw from backing out under heavy impact drill operation.