AlorAir 360 degree Intake Air Filtration System - (1350 CFM) with Strong Vortex Fan, Built-in Ionizer, Shop Dust Collector for Woodworking Shop,

AlorAir 360 degree Intake Air Filtration System - (1350 CFM) with Strong Vortex Fan, Built-in Ionizer, Shop Dust Collector for Woodworking Shop,

Kindly Note: This woodworking air filtration systems does not meet California's regular requirements, it can not be shipped to California. Accessibility: Timer cycle controller, you can set fan to shut down automatically in 1-9 hours. √ IR remote system: There is no wireless interference, and the anti-interference ability is strong. √ With a hook and chain: Puricare 1350IG air filtration system is easy to move and can be hung from the ceiling in the shop or placed on a workbench. Built-In Ionizer: ALORAIR air filtration system built-in ionizer, the air passed through is subjected to electric discharge. Pollutantsand odor particles in the drawn-in air are subjected to oxidative degradation and can achieve the effect of dust removal,elimination of odors, and improvement of air quality to promote your health. 360 degree air Intake Air Filtration System: The Shop Dust Collector has a 360 degree air intake design, powerful enough to cover a large area with high circulating airflow, sawdust from woodworking, grinding, sawing, etc. Improving your workplace’s air quality. Dimensions: 20.5"Lx 20.5" Wx 9.8"H; electrical Reguirements: 115v,60 Hz, 1.5 A ; cover rooms up to-1700 sq.ft; noise rating: 60 to 69 dB Strong Vortex fan: The Air Filtration System for woodworking is equipped with a strong vortex fan, which generates a strong airflow when working, and maintains a high static pressure state even if the filter covers a large amount of wood chips. It has two-stage speed selection. Suitable for wood carving workshop, Woodworking, Garage. High Eficiency Filtration Technology: The shop air filtration system is equipped with a fiter with class MEVR 11, which canstop 90% of 3-10um particles and 85% of 1um particles. ldeal for wood carving, sanding, tumning, scroll saw work, rotary tools, powder mixing, etc. it quarantees periect results in terms of reducing indoor alr polution. The filter can be easily replaced.
You can't help but create airborne dust when cutting or sanding wood. It's the pesky side of woodworking. And that's where an air-filtration system comes to the rescue. This Purecare 1350IG air filtration system, typically suspended from the ceiling, draws dust-laden air into the unit and through MERV-11 filters, exhausting (hopefully) clean air out the bottom.

1. Dimensions – 20.5” L x 20.5” W x 9.8” H | Electrical Requirements – 115V, 60 Hz, 1.5A | Air flow – 1050/1350 cubic feet per minute | Cover rooms up to – 1700 sq ft. | Noise rating – 60 to 69 dB
2. It comes with 360 degrees Air Intake design that circulates the air in a 400-square-foot room up to 13 times per hour.
3. Two-speed operation allows optimum airflow at a rate of 1050 or 1350 cubic feet per minute.
4. The programmable timer automatically shuts the unit off after the set number of minutes.
5. Includes four MERV-11 filters, which can be easily replaced.
6. Built-in Ionizer
It works by sending out charged particles with either negative or positive ions into the air. Pollutants and odor particles in the drawn-in air are subjected to oxidative degradation. Make the air fresher, and provide a cleaner environment.
7. Details add convenience
Remote control. You can turn the unit on or off, control the fan speed, and even set a timer that turns it off automatically via a panel on the unit, or by remote control.