BAIZHIHUA Filter Kit 24121212 Oil Separator 39329602 Oil Filter 88171913 Air Filter Compatible with Ingersoll-Rand Screw Air Compressor UP6-5 Thru UP6

BAIZHIHUA Filter Kit 24121212 Oil Separator 39329602 Oil Filter 88171913 Air Filter Compatible with Ingersoll-Rand Screw Air Compressor UP6-5 Thru UP6

All 3 Filters in One Package (Oil Separator 24121212+Oil Filter 39329602+Air Filter 88171913) Compatible with Ingersoll-Rand Screw Air Compressor UP6-5 Thru UP6-15C Direct Replace Ingersoll Rand & Product Compatibility 100% This filters are not manufactured or sold by Ingersoll Rand. High Quality Raw Materials(H&V) Micro Glass Fiber Media Filter,Cost-Effective,Reduce Maintenance Costs Ensures compliance with original manufacturing standards and compatibility with original filter elements BAIZHIHUA Filter Kit 24121212 88171913 39329602 for Ingersoll Rand Air Compressor
Replacement Filter Substitute Spare Parts
Brand:BAIZHIHUA
Type:Filter Set
Model：24121212 88171913 39329602
Packing:
24121212 Air/Oil Separator 1 PC
88171913 Air Filter 1 PC
39329602 Oil Filter 1 PC
Working Hours:2500-3000H

These filters are not manufactured or sold by Ingersoll Rand. Ensure that maintenance personnel are properly trained, competent and have read UP6 Operation And Maintenance Manual.
1 Run the compressor until warm. Stop the compressor, close the air outlet valve and switch off the voltage.
2 Depressurise the compressor by unscrewing the filler plug one turn to permit any pressure in the system to escape. Remove the plug after the system is depressurized.
3 Depressurise the air receiver by opening the drain valve.
4 Remove the plug, drain the oil by opening the drain valve. Close the valve and refit the plug after draining. Deliver the drained oil to the local oil collection service.
5 Remove oil filter and separator. Clean the seats on the manifold.
6 Oil the gaskets of the new filter and separator and screw them into place. Tighten firmly by hand.
7 Fill oil separator/tank with oil until the level reaches the middle of sight-glass. Ensure no dirt gets into the system.
8.Refit and tighten filler plug.
9 Close drain valve of the air receiver.
10 Run the compressor for a few minutes.
11 Stop the compressor and wait a few minutes to allow the oil to settle.
12 Check the oil level. Add oil if necessary.If the oil level is too low, depressurize the system by unscrewing the filler plug in one turn to permit any pressure in the system to escape. Depressurize the air receiver by opening the drain valve.
13.add oil as necessary. The sight-glass should be 3/4 full. Retighten plug and close drain valve of the air receiver.
14. Reset the filters service warning.