M2cbridge Multifunctional Edge and Corner Guard Coverage Furniture Safety Bumper DIY (Pink (6.5ft x 2))

M2cbridge Multifunctional Edge and Corner Guard Coverage Furniture Safety Bumper DIY (Pink (6.5ft x 2))

NBR foam rubber, furniture bumpers edge guard can absorb impact and protect you from sharp edges and corners, our cushioned foam for safer impact where you need it most Dimensions: 2m x 8cm x 0.8cm, premium high density NBR edge guard; Apply on glass tables, beds, kitchen units, desk, bedroom furniture and more, can be used on all surfaces steel, wood, glass and ceramic etc, Protect your family from injury when falling or hit SGS tested, Toxic free, odor free, SCCP free, phthalates free and fire-retardant, DO NOT leave your child unattended. Keep packaging away from children. Please avoid children biting Apply to nursery decoration, child room protection, playground renovation, home security protection essential products. Before installation, be sure to clean the surface of the adherend. If it is greasy, dust, or moisture, it will be difficult to stick as expected. The plaster wall, brick wall and tempered glass may be slightly less sticky. Package include: 2*2 Meter Thick Edge Guard ; Double-side Tape; Instruction Color Card. After pasting, please press hard and leave it for 24 hours before touching it. It is best not to touch it during the period. After using for a long time, you can wipe with a wet towel to remove the stains
WARNING:

THIS IS NOT A TOY OR TEETHER.
For use by adult only.
DO NOT leave your child unattended. Keep packaging away from children. Please avoid children biting.
Before installation, be sure to clean the surface of the adherend. If it is greasy, dust, moisture or unevenness surface , it will be difficult to stick as expected. The plaster wall, brick wall and tempered glass may be slightly less sticky.

Impact absorbing rubber foam - soft, durable and extra thick. Babyproofing made convenient, efficient, and frustration-free. No alignments, no diagrams to follow, no wasted time.

TO INSTALL (Best for one-time use only):
1. Measure distance of furniture edge between two corner cushions;cut section of edge cushion to fit;repeat as necessary;
2. Dry wipe surface area of furniture edge;
3. Apply double-sided tape firmly to both inner surfaces of edge cushion by aligning tape to cushion’s outer edges: start at one end and apply strips of tape to cover entire length of edge cushion;
4. Remove tape backings and push cushion deeply and snugly into furniture edge;
5. Press both sides of cushion firmly for several seconds along its complete length

After pasting, please press hard and leave it for 24 hours before touching it. It is best not to touch it during the period.
After using for a long time, you can wipe with a wet towel to remove the stains.

What you get: 1 x Edge Guard, 1 x double side tape, 1 x instruction color card