CNCTOPBAOS 3D Touch Probe Edge Finder to Find Desktop Center,V5 NPN NO 3D Edge Finder with Tip,Waterproof Anti-roll CNC Router Probe 6mm Handle

CNCTOPBAOS 3D Touch Probe Edge Finder to Find Desktop Center,V5 NPN NO 3D Edge Finder with Tip,Waterproof Anti-roll CNC Router Probe 6mm Handle

Function: The three-coordinate probe can realize quick centering, edge finding, center finding, shape measurement and other functions by connecting the CNC to the knife edge Supported software: Adapt to various control panels such as grbl control panel and Mach3; Repeatability Accuracy: 0.01 mm/ 0.0004; It solves the trouble of positioning the workpiece during the second clamping during the machining process 3 wires: NPN-NO 3 wires: Red-VCC / DC5-24V power; Yellow: IO/ Signal Output;Black- GND/DCM; Indicator light: green light when power on, red light after triggering Material of the probe: The shell is made of fine frosted black oxidized aluminum alloy with a flat surface anti-roll design Material of the stylus: The probe tip/stylus is machined from stainless steel up and down, and the ball head is made of tungsten steel ball, which has the advantage of wear resistance;The concentricity is fine-tuned to within 0.05 before factory;Please measure and adjust it by yourself after receiving it;Be sure to use ER11 spring chucks of AAA or above, otherwise the concentricity of the probe tip will be affected

Package Include: 

1x 3D touch probe

1x Stainless steel probe tip

1x cable

Specification:

Power: DC5-24V

NPN-NO 3 wires: Red-VCC (DC5-24V power);Yellow: IO/ Signal Output;Black- GND(DCM)

Repeatability Accuracy: 0.01 mm/ 0.0004 in.

Feedrate: 50-200 mm/min.

Approach Direction: ±X, ±Y, +Z.

Over Travel Protection Distance: X- ± 4mm/0.16 in , Y- ±4mm/ 0.16 in, , Z- 2mm/ 0.08 in.

Lifetime: > 3 million triggers.

Software Recommendation for 3D Probe

If you are using a mach3 system, it is recommended to use the open source Probe Wizard.

If you are using the grbl system, it is recommended to use Grblgru

Q&A

1.Need to turn on the spindle speed?

Never, never, never,definitely no.

2.How to distinguish the three wires?

The red wire is VCC, the black wire is GND, and the white wire is IO.

3.Why is the concentricity different every time the probe is installed?

Because your ER chuck spring clip cannot guarantee 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again. So your chuck is best to buy AAA and above accuracy (concentricity