VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling

Long Service Life: Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance Superior Versatile Performance: High speed steel sharp cutting teeth effectively drills through metal , wood , cornhole boards, PVC board , plastic and drywall , clean and smooth , high precision Easy to Use: Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly High Efficiency: The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal Package Include: 1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key

VIKITON HOLE SAW (KIT & SET)

Product Description
This hole saw (kit & set) is made by VIKITON in Chain.
Bi-Metal construction of Hole Saw last longer service life.

Suitable for Drilling What Material
Suitable for Metal(Iron Pipe, Aluminum, Brass), Wood and Plasitc and so on.
Not suitable for Wall, Glass, Concrete and Ceramic.

Package
1 pc hole saw(6 inch)
1 pc pilot drill bit for replacement
1 pc arbor(with 1 drill bit)
1 hex key

Applicable Scene
This hole saw kit can be wildly used in different project such as house project, school project, hotel projcet and so on.

How to Assemble
1.Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly.
2.Take out the hex key, align the shorter end with the hole on the connecting arbor, turn it counterclockwise, replace it with a new drill bit, and then tighten it with the hex key.

Attention
1.Don't touch the hole saw immediately after drilling material beacuse of high temperature.
2.Add coolant or water when drilliing metal.
3.Keep drilling slowly when the pilot drill bits through the material.
4.Stop drilling immediately if the hole saws work abnormally during operation.
5.Choose suitable rotating speed when drilling different material.