Zivases PLC MPI/DP/PPI Programming Cable for Siemens S7 200/300/400 S7-200 S7-300 S7-400 6ES7 972-0CB20-0XA0 USB-MPI+ PC USB-PPI,USB/MPI PC Adapter

Zivases PLC MPI/DP/PPI Programming Cable for Siemens S7 200/300/400 S7-200 S7-300 S7-400 6ES7 972-0CB20-0XA0 USB-MPI+ PC USB-PPI,USB/MPI PC Adapter

Support the Siemens S7-200 / 300/400 PLC communications.The signal partially isolated by high-speed optical coupling. Support for MPI and DP multi-master communication, support Siemens touch screen.Support for multi-master communication 200PLC and ET200 communications, and PPI.Support 840D CNC system programming.Support WIN7 32 and 64 series, support V5.5 software (no need to install the drive in V5.5).Support a variety of high-end communication Siemens PLC. The installation of Siemens original driver, without generating serial, USB direct selection. There are soft shell protection, anti-pressure, drop.The choice of PTC resettable fuse, overvoltage, overcurrent, short circuit case well protected internal circuitry. 6ES7972-0CB20-0XA0 Cable is optical isolation for industrial design in USB port and RS485 ports are equipped with surge protection and lightning protection circuitry for Siemens S7-300 / 400 and S7-200 series PLC full range PLC. Particularly suitable for interferences fragile industrial field communication port, the circuit in a variety of protective measures to ensure the safe operation of the system.

Product Details:
Model: 0CB20 compatible (6ES7 972-0CB20-0XA0)
Interface: USB-9 pin male
System: Perfect support for XP WIN7 VISTA
Complete set: packing box + adapter + standard wiring
Purpose: Support PPI/MP and DP multi-master communication, used for Siemens S7200/300/400 and Siemens department touch (TP170/177/270, OP25/35/77, MP177/270/277B, etc.)

Main parameter:
1. Support 0CB20 eight generations of operating systems: Windows2000/ Win 2003 / Windows XP / Vista / windows 7 32bit / 64 bit
2. Support 0CB20 eight generations of programming software version: STEP7 V5.2 and higher, STEP7 Micro / Win 4.0 and above
3. Full-speed USB device interface, compatible with USB V2.0 specification
4. Power: USB bus powered, power consumption of about 100mA, with overcurrent protection and surge protection
5. Optical Isolation voltage: 1000VDC
6. USB port with anti-surge protection
7. Support for MPI baud rate: 19.2Kbps, 187.5Kbps automatically adapt
8. Support PPI baud: 9.6Kbps, 19.2Kbps, 187.5Kbps automatically adapt
9. Support for long-distance communications, the maximum communication distance of 1000 m (RS485 end, when the baud rate is 187.5Kbps)
10. LEDs with power, data reception indicator, the data transmission indicator
11. Each PC only supports a programming cable 0CB20 Yashiro
12. Working temperature: -20 ~ + 75℃
13. Cable length: 2.5 m

Isolation advantages:

full-signal photoelectric isolation, strong stability, can monitor S7-300 online, data transmission block, generally used in the field, because there are usually inverters, modules and other equipment on the field, interference will occur during start and stop, which will affect data Transmission, the isolation type must be selected at this time.