Feeler Gauge LUORNG 4pcs Spring Steel Metric Feeler Gauge Feeler Gap Gage Measuring Tools (2pcs 0.1mm and 2pcs 0.2mm)

Feeler Gauge LUORNG 4pcs Spring Steel Metric Feeler Gauge Feeler Gap Gage Measuring Tools (2pcs 0.1mm and 2pcs 0.2mm)

The feeler gauge is made of spring steel, which is rust-proof, tough, not easy to break, and durable. The feeler gauge is heat treated as a whole, with polished edges, fine workmanship, smooth surface, no burrs, and not easy to hurt hands. Simple structure and convenient use. This feeler gauge is highly accurate and is one of the measuring instruments used to check the gap, allowing you to quickly and easily measure the gap width. This feeler gauge can be used to check clearances such as ignition points, valves, tappets, spark plug clearances, bearing clearances, pistons, piston rings, brake bands, etc. The package contains: 2 x feeler gauges 0.1mm thick + 2 x feeler gauges 0.2mm thick. Instructions:
1. Wipe the measuring surface of the feeler gauge with a clean cloth. Do not measure when the feeler gauge is stained with oil or metal chips, otherwise the accuracy of the measurement results will be affected.
2. Insert the feeler gauge into the measured gap, pull the feeler gauge back and forth, and feel a slight resistance, indicating that the gap value is close to the value marked on the feeler gauge; if the resistance is too large or too small when pulling, the gap value is smaller or larger than the feeler gauge. value marked above.

Material: spring steel
Dimensions: 100mm x 10mm / 3.94