Flycolor 20A Brushless ESC, Motor Electric Speed Controller for Multi-Rotor DIY Drone with XT60 & 3.5mm Bullet Plugs (4 Pack)

Flycolor 20A Brushless ESC, Motor Electric Speed Controller for Multi-Rotor DIY Drone with XT60 & 3.5mm Bullet Plugs (4 Pack)

【OneShot 125】Supports OneShot125 protocol so communication speed increases by 8 times between flight controller and ESC. 【Protection Function】Includes start-up protection, overload protection, loss of throttle signal protection, blocked rotation protection. 【Pre-soldered】Come with XT60 Connector and 3.5mm female banana plugs. 【Smaller & Lighter】50% smaller in size and 45% lighter at 10 grams. 【500Hz Refresh rate】Supports throttle signals with refresh rates up to 500Hz, compatible with various flight controllers.

FLYCOLOR Fairy 20A ESC, Brushless Motor Electric Speed Controller

Features:

1. Supports OneShot 125 protocol

2. Excellent blocked rotation protection

3. Smaller size and lighter weight

4. Specially designed program for multi-rotor with rapid throttle adjustment response during flight

5. Up to 500Hz refresh rate throttle signal, compatible with most flight controllers (throttle signals >=500Hz are non-standard)

6. The firmware is highly adaptive and retains four types of approach angle settings, making it extremely easy to use.

Specification:

Continuous working current: 20A

Max. instantaneous current: 30A 10 seconds

Input voltage: 2-4 cells lithium battery or 5-12 cells Ni-Cd/Ni-Mh battery

BEC: 5V 1A

Pow input plug: XT60

Motor output plug: 3.5mm female banana plug

BEC: DuPont plug

Weight: about 10g

Compatible for: DIY drone Multi-Rotor F330F450 F550 X525, RC fixed-wing airplane model, helicopter, etc.

Note:

1. The plugs are soldered before shipment and it’s ready for use once the wires are connected.

2. The program setting is completed in the factory, and no operation is required for normal use.

3. Calibration must be performed before first use, see instructions for details.