PGFUN 0-5V/ 0-10V/ 4-20MA/ RS485 High Accuracy Solar Radiation Sensor Transmitter IP67 Outdoor Meteorological Solar Irradiance Detector Sensor (0-10v)

PGFUN 0-5V/ 0-10V/ 4-20MA/ RS485 High Accuracy Solar Radiation Sensor Transmitter IP67 Outdoor Meteorological Solar Irradiance Detector Sensor (0-10v)

High Accuracy Solar Radiation Sensor Transmitter, 0.3~3μm spectral range. High transparency quartz glass, light transmittance up to 95% Aluminum alloy shell featuring rust-resistant, corrosion-resistant and waterproof, comes with built-in spirit level and adjustment knob To know more specs and other details about the sensor, please refer to the content in the following description section and the attached manual. If any question about the product, free to contact us. PGFUN 0-5V/ 0-10V/ 4-20MA/ RS485 High Accuracy Solar Radiation Sensor Transmitter IP67 Outdoor Meteorological Solar Irradiance Detector Sensor

Specification:
ANALOG OUTPUT (4-20MA, 0-5V, 0-10V)
Power supply range : 10V~30V DC
Power consumption :0.06W
Output : 4-20mA, 0-5V, 0-10V
Working humidity: 0%~100%RH
Working temperature :-25℃ ~ 60 ℃
Spectral range :0.3~3μm
Measuring range: 0~1800W/m2
Resolution :1W/m2
Response time ≤ 10S
Nonlinear ≤ ±2%
Annual stability ≤ ±2%
Cosine response ≤ ±10%
Wiring: brown-power +, black- power -, blue - signal +, green- signal -.

RS485 OUTPUT
Power supply range :10V~30V DC
Output : RS 485 (standard Modbus-RTU protocol)
Power consumption: 0.6W
Working humidity: 0%~100%RH
Working temperature: -25℃ ~ 60 ℃
Spectral range: 0.3~3μm
Measuring range : 0~1800W/m2
Resolution :1W/m2
Response time :≤ 10S
Nonlinear: < ±2%
Annual stability : ≤ ± 2%
Cosine response: ≤ ± 10%
Wiring: brown-power +, black- power -, green- 485-A, blue- 485-B.

Installation Steps
1. After the installation is complete, remove the protective cover
2. Make sure the bracket is installed and the radiation sensor is parallel to the ground.
3. Secure the sensor to the mounting bracket by using a screw through the mounting hole on the sensor.
4. Please note that the dust cover should not be damaged during the installation process, so as not to affect the measurement accuracy.