Jienk IDC20 Breakout Board 2x10 20Pins Male Header Terminal Block Connector with C45 DIN Rail Mounting feet for PLC MCU

Jienk IDC20 Breakout Board 2x10 20Pins Male Header Terminal Block Connector with C45 DIN Rail Mounting feet for PLC MCU

IDC pin pitch 2.54mm/0.1" male header connector. Standard IDC20 pitch 0.1" header, you can use 20pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment. DIN Rail Mounting: Come with Din mount carrier and screws Compatible with 35mm, 32mm or 15mm DIN rail. Wire range: 26-16AWG. Rated voltage: 60V. Rated current: 1A / per pin. Operating temperature: -20 to 50 Celsius. The screw connectors make attaching and removing wires easily. Really helpful in your DIY prototyping project. Widely Applications: It is well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2x10 20-position header connector. Applications include the Raspberry Pi A+, B+, 2B, and 3B boards, all of which use a 0.1" pitch 2x10 I/O pin header for their GPIO expansion ports. Specifications:
IDC pin pitch 2.54mm/0.1" male header connector.
Pitch 3.81mm/0.15" screw terminal block.
DIN Adapters (brackets): for width 35 / 32 / 15mm DIN rails.
FR-4 fiber glass PCB, dual copper layers.
Rated voltage: 60V.
Rated current: 1A / per pin.
Operating Temperature: -20ºC to 50ºC
Terminal block specifications:
Wire range: 26-16AWG.
Strip length: 5mm.
Screws: M2,steel,Cr3+ Zn plated.
Torque: 0.2Nm (1.7Lb-In.)
Pin header and Cage: Brass.
Package Content:
1PCS IDC20 2x10 Pins 0.1" Male Header Breakout Board