Automotive Electronic Magnetic Faults Indicator, OBDEMOTO 101 Automotive Electronic Faults Detector,Car Spark Tester and Voltage Tester Pen with LED

Automotive Electronic Magnetic Faults Indicator, OBDEMOTO 101 Automotive Electronic Faults Detector,Car Spark Tester and Voltage Tester Pen with LED

【Main Function】The OBDEMOTO 101 detector is using advanced technology from Germany, it can collect and analyze signals under non-dismantle automotive electrical parts. Testing results are showed by LED indicator and beeper. 【Easily Diagnose】Easy to know if there is faults of the automotive electronic parts. The beeping of the OBDEMOTO 101 is an indication that the component being tested is normal and not damaged or shorted or disconnected, conversely, no beeping during testing is an indication that the component is bad. 【Test Range】 Lgnition Coil(traditional coil,double spark coil,single spark coil) generator, fan,electric-magnetic valves,emission gas controlling value, fuel injectors,relay.etc. 【How to Use OBDEMOTO 101】1. Press the button to push it out and it will come out; 2. Find the correct position of the positive and negative battery terminals; 3. After the battery is installed,cover well and then push the button up to open; 4. Turn on and press the blue button to find the fault point. If you can't understand it,you can see the A+page. 【Car Manufacturer Warnings】1. To make Pen power signal detector test components, there will be a clignote LED and corresponding spoken language if park run very well; 2. With 2 different detectors on high sensitivity test can be power lines; 3. About a detector Pen line antenna to specific test results; 4. There are about detector Pen model overturned.Used for normal test, are being used to strong magnetic field test. 【High Quality】 Made of high-quality aluminum material for durability and high quality. The package has the 2*1.5V AAA Battery. Variety of detection:

Coil(traditional coil, double spark coil, dingle spark coil).

Electric generator, inside fan motor, combination valve(heating, water cooling)

Emission controling valve, fuel injector, spark plug, hall sensor, electric relay

Instructions:

1) put the detector pen to the electric components to test, there will be corresponding voice signal and LED flashes to show the park if it is working fine.
2) The 2 sides has different sensitivity of the top on the detector can test different electric lines.
3) Hold the detector pen to the coil of the line to get precise testing results.
4) There are modes switch on the detector pen. LevelII is used for normal test, levelIII is used for strong magnetic field test.

Safe Operations:

1. The car to be tested should park at an area with good air condition, can not suck into exhaust emission from engine
2. The car to be tested should be far away from smoke and fire source;The gasoline engine and chargeable battery is possible to occur explosive air, so it is very necessory to prepare fire extinguish gears accordingly.
3. During test process, it is necessory to avoid the moving parts and heat source to protect tester and testing equipments.
4. To be far away from the cooling fan of engine
5. Do not put other equipments on the battery which is possible to make the battery inside to be Short, which may cause hurt or damage of tester and equipments.
6. Do to turn off the ignition switch before connecting or remove electrical parts.
7. Do not leave the car during the test
8. Please confirm the gear position of the car : automatic is at P; manual is at blank; Do push tight of manual brake ; put blocks before the driving tyres

Package including:

1pc x Automotive Electronic Faults Detector OBDEMOTO 101