uxcell #40 Chain Idler Sprocket, 17mm Bore 1/2" Pitch 15 Tooth Tensioner, Black Oxide Finished C45 Carbon Steel with Insert Single Bearing for ISO 08A

uxcell #40 Chain Idler Sprocket, 17mm Bore 1/2" Pitch 15 Tooth Tensioner, Black Oxide Finished C45 Carbon Steel with Insert Single Bearing for ISO 08A

Specifications: Number of Teeth: 15; Bearing Model: 6003ZZ; Outside Diameter: 64mm / 2.52-inch; Bump Width: 5mm / 0.2-inch; Total Width: 17mm / 0.67-inch; Bore Diameter: 17mm / 0.67-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7mm / 0.28-inch; 1 x Idler Sprocket Idler sprocket is a chain sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain. Widely used in milling machine, drilling machine or other machinery transmission occasions. Features:
1. Idler sprocket is a chain sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.

Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 15
Bearing Model: 6003ZZ
Outside Diameter: 64mm / 2.52-inch
Bump Width: 5mm / 0.2-inch
Total Width: 17mm / 0.67-inch
Bore Diameter: 17mm / 0.67-inch
Pitch: 1/2-inch / 12.7mm
Tooth Width: 7mm / 0.28-inch

Package Content: 1 x Idler Sprocket