LRT 8858 Micro Hot Air Station SMD Rework Desoldering Digital Heat Gun

LRT 8858 Micro Hot Air Station SMD Rework Desoldering Digital Heat Gun

Portable hot air gun, Small size, Sleep function, Energy saving, Long life, Anti-static design. The temperature adjustment range is 100-500℃ (212-932℉), ℃/℉ Convertible. The air volume can be adjusted, F1-F10. With power switch, there is no need to unplug the power plug. The use of long-life infrared heating elements and special temperature sensing devices, as well as microcomputer precision control of heat conduction technology, make the temperature control curve of the hot air gun meet the requirements of the SMT production process. Widely used in mobile phone repair, computer repair, electronic component welding, suitable for beginners, DIY, professionals. It is simple to set up and easy to operate. Comes with 6 pcs air nozzles (Diameter=3/4/5/6/8/10mm), two anti-static tweezers (straight and elbow), IC puller. The control station can easily and accurately regulate the temperature and air flow of heat gun, which can be widely used for heat shrinking, drying, paint removal, unfreezing, preheating, rubber welding, desoldering of various components such as SOIC, CHIP, QFP, PLCC, BGA.


Specification:
Operating Voltage: 110V
Power Frequency: 50-60Hz
Operating Power: 680W
Adjustable Temperature: 100-500℃(212-932℉)
Adjustable Wind Pressure: 3-10mp
Mode: automatically
Display: digital tube/3
Dimension: 14.2cm × 6.5cm × 3.9cm
Weight: 776g /1.71LB


1. Comfortable portable handheld and the Digital LED display.
2. Microcomputer control , warming-up quickly.
3. Adjust the air flow and temperature control keypad.
4. When the temperature is less than 70°c , can stop rotation automatically.
5. High-quality resistance good for long service life.
6. Safe solder QFP , PLCC , BGA and other temperature-sensitive components.
7. Intelligent detection and cool airflow features.


Package List:

1 * Control Station

1 * Power Cable

1 * Hot Air Gun with Stand

6 * Nozzles

2 * Anti-static Tweezers

1 * IC puller


Please note: This machine has over temperature protection. If the temperature is set to 480 degrees Celsius and the 3mm nozzle may be overheated, S-E will be displayed. S-E will also be displayed if the heating is heated for a few seconds without wind when starting, so that the handle will not be burned. The sensor will also display S-E if there is no signal with wind or heat.

If it is found that the temperature does not reach the set temperature, temperature calibration can be performed.
There is a screw in the slot on the side of the controller that increases the temperature value clockwise and decreases the temperature value counterclockwise.