Triumilynn 3/4" Brass Electric Solenoid Valve 110V Normally Colsed for Air Water Fuel Gas Diesel 1PC

Triumilynn 3/4" Brass Electric Solenoid Valve 110V Normally Colsed for Air Water Fuel Gas Diesel 1PC

🕹Spcification: Brass body, AC110 volt, 2 way solenoid valve, 3/4" NPT port 🕹Compatible With: Universal normally closed electric humidifier solenoid valve, for air, water or gas 🕹Application: It is commonly used with gasoline, kerosine and other organic solvents, widely used on do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing 🕹Easy to install: Easy to apply, the installation of solenoid valves is very simple. (Normally closed. When it is powered on, it will turn on and stay on until the power is turned off) 🕹Please check your engine's model and part number before buying and contact us promptly for any issues

👍Features:

🧨Normally closed electric solenoid valve is constructed with a enduring brass body, three-quarter inch (3/4") female threaded connections, and heat and oil resistant Viton gasket.

🧨Suitable for use with hot or cold water, gas, air, very low viscosity fluid, oil and hydrocarbons, gasoline, kerosene, or diesel fuel.

🧨Wode Application: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

👍Specifications:

Size: 3/4"

Flow Aperture: 20mm

Body Material: Brass

Gasket / Diaphragm / Seal: VITON

Rated voltage: AC 110 V, ± 10%

Current: 0.191 A

Power rating: 21 VA

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 7.6 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

👍Notice:

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve